Nifty looking number plate

Hey guys

All of you that have fitted different front on your supe's......did you all use your existing number plate or did you get a smaller one made...I have seen a few supe's with a slightly smaller plate at the front and thinks it gives the car a much more clean refined look

Also are there any legality issues with having a smaller plate........

can the fuzz do me for this??

Thanks

Mikey

Depends on what you mean by smaller?

...

http://www.webaxis.co.uk/~marco/supra/FMIC_02.jpg

Thanks, I was just about to say what you can see in the pic.....no need now

notice the smaller plate.....was wondering where to get one made, how to fit and the legality thing

thanks guys

Mike

http://www.fancyplates.com have made up all my number plates in the past. You can choose custom sizes as well.

There is also no specific legal size for the plate itself. It is only the characters, font, spacing, borders, stroke that must adhere to certain dimensions, so it's perfectly feasible to have a 'small' and legal plate if you have a short registration.

I may be wrong here, but ive been told by someone i know very closely who is a copper that to be legal you have to have either the standard plates or the square jap style plates. These smaller plates as pictured above and smaller bike style plates are illegal. I may be mistaken. Best thing to do is to ask a local copper

GT Grafix made up my plates, the letters are 1mm short of legal and the spacing between them is 1 or 2mm off but, the rest of the plate (boarder) is trimmed away to aid in air flow to the FMIC.

http://home.btconnect.com/mkivsupra/April05Front1.jpg

http://www.fancyplates.com have made up all my number plates in the past. You can choose custom sizes as well.

Fancy plates are great to deal with, do a search, you will find lots of praise for them.

Mine was made up my envy auto design small not sure what % now i no its not legal tho

As Fayes brother has pointed out, we can probably get away with the smaller 'import' size lettering etc, so if you stick to the minimum border width around the lettering, you can have a slightly smaller plate.

....until someone tries to enforce the law to the nth degree.

just a square one for me, rear is the same