Jump to content
The mkiv Supra Owners Club

member nearly a year now but never said hi


Stealth-1JZ

Recommended Posts

just realised i never posted in here and im nearly a full member a year now LOL

 

im Damien from just outside dublin and i have a JZZ30 Soarer

wanted a supra but 3 years ago a supra was way out of my budget to buy/tax/inshure so i got the soarer.

 

she was a bone stock base model GTT

I bought the car in Nov 06, but it wasn’t till July 07 that i started to change things.

This is after a bit of cleaning for a supra meet

http://img67.imageshack.us/img67/5282/untitled8fj4.jpg

 

1st dyno run in CDA with just a TRD drop in filter resulted in 196whp/220ft/lbs and she was doing 14.4-14.6 runs in the pod. Not to bad for a stock 1726kg car.

I got a set of wheels of Richie in pro-parts next, 18x8.5 P1’s in bronze wrapped in Bridgestone Potenza RE050’s

http://img528.imageshack.us/img528/7783/dsc00046km4.jpg

http://img528.imageshack.us/img528/47/dsc00047tc2.jpg

 

Then Marty from SSI told me he had a few bits he had for sale,330mm UK supra brakes allround,4pots up front and 2 pot rears, Blitz Nur spec R cat back, supra front pipe decat, greddy E-01 boost controller, Emanage Blue. Walbro pump and Automotive fuel pressure regulator kit for the 1jz.

At the same time i also ordered a set of BC coilovers off nick in CDA and a Greddy Spec-R FMIC off Nengun.it was an expensive few months.

 

The fist bits that went on were the BC coilover, put on and set up by the lads in CDA, im still impressed by them today, grand and comfy on the road but a few twists of the adjuster and she’s good for track/drag

I then ran into an issue with the rad, after 2 new replacement ones that both failed agen i took the plunge and ordered a Sard rad agen off nick in CDA, car was off the road till that arrived.

The Nur Spec arrived soon after and with the help of a very drunk gar and his mate we put it on, was well cuffed with the sound of it.

Then she went back up to Marty in SSI to get all the bits above fitted along with some other small bits just in time for Japfest in Mondello.

Another run on CDAs dyno with an unmapped EMB resulted in

301.5 @ the fly

250.3 @ wheels

263 ft/lbs

I was up about 55Whp and 40ft/lbs

car was now doing 14 sec dead runs into a head wind in the pod

and and est 1.16 round the national in Mondello

 

 

I told nick id be back after Christmas to get the car maped, in the mean time i bought a set of TME Recaros

http://img3.imageshack.us/img3/9299/13032009147.jpg

http://img3.imageshack.us/img3/7199/13032009146.jpg

i finally got back out to nick after the new year to get her maped,the results @ 15psi were

291.2 RWHP

370.4 FT/LBS

EST 350.4 FWHP

http://img217.imageshack.us/img217/9226/roadspeed.jpg

From stock i am now up 100Whp and 150ft/lbs

the car has a bit of hesitation at low speed/launch due to the FMIC piping, gearbox starting to slip and what Marty now thinks is the OEM knock sensor but i was still very happy with the results nick got out of a basic piggy back ECU

To get the car ready for its 1st track outing at the charity track day in May i ordered new DBA disks and got nick to order me some endless y sport pads [nice road pad IMHO] and a new set of RE050s for the back wheels.

These should all be on next week

then ill have to see how she is at the charity day and get her back over to the pod foer a few more runs bt:)

 

I’d like to thank Colin and Marty up in SSI [supra Specialist Ireland]

http://www.supraspecialists.moonfruit.com/

For all there hard work and help so far, they have looked after the servicing bits i couldn’t do along with providing advice.

Top men for supra’s and 300zx along with any Jap import or domestic car

 

Also thanks to Nick and the lads in CDA who has been helpful sousing bits for the car and also dealing with an auto on the dyno along with mapping it as well bt:)

 

 

http://img4.imageshack.us/img4/3451/dsc0460copy.jpg

http://img4.imageshack.us/img4/356/dsc0464copy.jpg

image

image

 

 

You may ask what the future hold for the car, well the 3 key bits are built drag box, a GT35R single, and respray/kit.

When i go single ill be hoping for around the 450-500whp mark

GT35R for when i go signal next year hopefully compared to the stock CT12A

image image

 

image image

 

and the kit

http://www.n-sane.org/clients/akcustoms/photos/SOARER01.jpg

 

 

thats me and the car.id still like a supra but i think id lose my ball's if i went for 1 now unless anyone wants to swap :eyebrows::D

Link to comment
Share on other sites

HKS 30/37S.

 

And I have 10mm shims and an MV Autos valve kit, and a suprastick. It removes the need for the factory ecu so I can bin the emanage blue and fit an Apexi Power FC.

 

For all I have done, and the various mods and dyno sheets follow these linkys....

 

http://www.soarerworld.com/forum/showthread.php?t=3834

 

http://www.soarerworld.com/forum/showthread.php?t=17138

 

http://www.soarerworld.com/forum/showthread.php?t=6865

 

http://www.soarerworld.com/forum/showthread.php?t=24967

 

http://www.soarerworld.com/forum/showthread.php?t=24968

Link to comment
Share on other sites

  • 2 weeks later...

ah Darragh iv been trying hard to hide allright :search:,my dam reg plate keeps falling off when i go fast tho :innocent:

 

HKS 30/37S.

 

And I have 10mm shims and an MV Autos valve kit, and a suprastick. It removes the need for the factory ecu so I can bin the emanage blue and fit an Apexi Power FC.

 

For all I have done, and the various mods and dyno sheets follow these linkys....

 

some more insperation for me there :D

 

heres a few of the other car :D

 

http://img199.imageshack.us/img199/5039/15092009313.jpg

 

http://img17.imageshack.us/img17/1481/15092009314.jpg

 

http://img17.imageshack.us/img17/8721/15092009315.jpg

 

http://img15.imageshack.us/img15/3452/15092009316.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.