Wez Posted January 13, 2009 Share Posted January 13, 2009 (edited) Hey All, I have been speaking to Cosworth about 2JZ-GTE pistons. These would not be the older JUN design but a much newer forging. £750 per set +VAT The price includes six pistons( 86.00mm, 86.50, or 87.00mm) with rings, pins, clips, skirt coating, anti det bands and polished crowns. Will the gudgeon pin diameter be the same as stock? 22mm pin same as stock Would the valve relief be large enough for +1mm valves? Max valve size allowed is 33mm Inlet, 28mm Exhaust Is the compression height same as stock? Compression height is same as stock Anymore questions let me know and I will fire them at Cosworth. So whos interested, need a min 8 sets? 01. Wez 02. Wez 03. 04. 05. 06. 07. 08. Edited January 31, 2010 by Wez (see edit history) Link to comment Share on other sites More sharing options...
Lee P Posted January 13, 2009 Share Posted January 13, 2009 Dam it, would have done this if I hadnt got my JE's Link to comment Share on other sites More sharing options...
JamieP Posted January 13, 2009 Share Posted January 13, 2009 Interested. Link to comment Share on other sites More sharing options...
Terminator Posted January 13, 2009 Share Posted January 13, 2009 Interested, if the price is right. I wonder if they would do a low compression option? Link to comment Share on other sites More sharing options...
RobSheffield Posted January 13, 2009 Share Posted January 13, 2009 I will be, in about a year Link to comment Share on other sites More sharing options...
Gaz6002 Posted January 13, 2009 Share Posted January 13, 2009 Provisionally interested... if I get a job in time Link to comment Share on other sites More sharing options...
Wez Posted January 13, 2009 Author Share Posted January 13, 2009 Interested, if the price is right. I wonder if they would do a low compression option? It will depend on how many people go for it, I will try and firm up some prices by the end of the week based on the interest in this thread. Link to comment Share on other sites More sharing options...
Sharpie Posted January 14, 2009 Share Posted January 14, 2009 One question, why straight to 87mm and not to 86.5mm ? Is it not a new block, should you need to re-bore after 87mm ? Link to comment Share on other sites More sharing options...
DannoSupra Posted January 14, 2009 Share Posted January 14, 2009 I'm interested Link to comment Share on other sites More sharing options...
Wez Posted January 14, 2009 Author Share Posted January 14, 2009 One question, why straight to 87mm and not to 86.5mm ? Not sure, I can ask though. Link to comment Share on other sites More sharing options...
Terminator Posted January 14, 2009 Share Posted January 14, 2009 One question, why straight to 87mm and not to 86.5mm ? Is it not a new block, should you need to re-bore after 87mm ? Thats what I thought, I have a 87mm bored block that took 86.95, pistons. I was told it would take a slight hone otherwise re-sleeve or new block. Link to comment Share on other sites More sharing options...
AlanM Posted January 14, 2009 Share Posted January 14, 2009 Interested Link to comment Share on other sites More sharing options...
Wez Posted January 14, 2009 Author Share Posted January 14, 2009 Questions have been fired off to Cosworth Link to comment Share on other sites More sharing options...
Wez Posted January 15, 2009 Author Share Posted January 15, 2009 Cosworth have replied and said they could do both an 86.5mm, 87mm and low compression version from the same batch with enough notice and details supplied. How does that sound? Link to comment Share on other sites More sharing options...
JamieP Posted January 15, 2009 Share Posted January 15, 2009 Any ideas on prices yet Wes? for me id want stock compression in 86.5 Link to comment Share on other sites More sharing options...
Wez Posted January 15, 2009 Author Share Posted January 15, 2009 Any ideas on prices yet Wes? for me id want stock compression in 86.5 Between £135 to £145 per piston. Link to comment Share on other sites More sharing options...
lockys96 Posted January 15, 2009 Share Posted January 15, 2009 would they do a set of 86.5mm mr2 pistons? im going to downsize from 87mm Link to comment Share on other sites More sharing options...
Wez Posted January 19, 2009 Author Share Posted January 19, 2009 Anymore interest? We need a min of 48 units, ie 8 sets Link to comment Share on other sites More sharing options...
Wez Posted January 19, 2009 Author Share Posted January 19, 2009 would they do a set of 86.5mm mr2 pistons? im going to downsize from 87mm Sorry no can do, different setup Link to comment Share on other sites More sharing options...
lockys96 Posted January 19, 2009 Share Posted January 19, 2009 pants Link to comment Share on other sites More sharing options...
Wez Posted January 19, 2009 Author Share Posted January 19, 2009 pants Link to comment Share on other sites More sharing options...
adi2009 Posted January 20, 2009 Share Posted January 20, 2009 I would be interested Link to comment Share on other sites More sharing options...
adi2009 Posted January 20, 2009 Share Posted January 20, 2009 One question though. Are they going to be made with oil galleys like the stock piston??? Link to comment Share on other sites More sharing options...
dandan Posted January 20, 2009 Share Posted January 20, 2009 Wez - I'm kind of interested but am some way from starting a new engine so please don't count on me. Do you know if the compression height will be the same as the stock pistons and also will the gudgeon pin diameter be the same as stock? Link to comment Share on other sites More sharing options...
Wez Posted January 20, 2009 Author Share Posted January 20, 2009 Questions have been passed onto Cosworth. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now