Tricky-Ricky Posted September 30, 2008 Share Posted September 30, 2008 Have a few bits for sale if anyone is interested:) HKS 256 inlet cam, sold to me as unused, and certainly looks it, i would like £160 for this, otherwise it will go on ebay for more;) Large cone shaped carbon end K&N filter, £30 Sold! Pair of H&R 15mm hubcentric spacers, with longer studs.VGC £55Sold! 2.5" first SS decat pipe with thermocouple boss, and restrictor ring, £40 Sold. A pair of J spec turbos in good condition (finally checked them out and there are no chips in this set) but there is a crack in the wastegate port of the 1st turbo, not bad and could still be used without problem but i would recommend just swapping the exhaust housing over, £160 STD fuel rail £20 STD injectors £50 ARC polished turbo to IC pipe std fitting, with BOV take off port £35 Sold STD ele trunk intake, £10 2x EGCV actuators £20 each Complete set of working VSVs £40Sold! Vacuum pipe set for std sequential, £10 Sold! a pair of tinted pre FL orange blobs,£8 std pre FL clock (digital)£10 TRAC Motor £10 All prices + P&P and Paypal charges if used. Link to comment Share on other sites More sharing options...
Robzki Posted September 30, 2008 Share Posted September 30, 2008 first dibs on decat Pm'ed Link to comment Share on other sites More sharing options...
Robzki Posted September 30, 2008 Share Posted September 30, 2008 whats a std ele trunk intake....? Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted September 30, 2008 Share Posted September 30, 2008 pm sent about k&n Link to comment Share on other sites More sharing options...
pete_TT Posted October 1, 2008 Share Posted October 1, 2008 pm sent about vsv's Link to comment Share on other sites More sharing options...
SilverSoop Posted October 1, 2008 Share Posted October 1, 2008 PM sent about the ARC polished to IC pipe... Link to comment Share on other sites More sharing options...
Missile Posted October 1, 2008 Share Posted October 1, 2008 Interested in Pair of H&R 15mm hubcentric spacers, with longer studs.VGC £55 Do you happen to have any pic's Link to comment Share on other sites More sharing options...
Rajinder Posted October 1, 2008 Share Posted October 1, 2008 Vacuum pipe set for std sequential, £10 I will take the above if they are the following, obviously not polished. Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 1, 2008 Author Share Posted October 1, 2008 Vacuum pipe set for std sequential, £10 I will take the above if they are the following, obviously not polished. Yes thats the one's PM me to sort payment etc thanks! Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 1, 2008 Author Share Posted October 1, 2008 Interested in Pair of H&R 15mm hubcentric spacers, with longer studs.VGC £55 Do you happen to have any pic's Here you go, Link to comment Share on other sites More sharing options...
Missile Posted October 1, 2008 Share Posted October 1, 2008 Thankyou very much, Where in East Sussex are you ? Will have to make sure with these fitted the wheels still fit under the arches etc. Do the normal wheel nuts fit the stud's? Cheers for the pic Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 1, 2008 Author Share Posted October 1, 2008 Thankyou very much, Where in East Sussex are you ? Will have to make sure with these fitted the wheels still fit under the arches etc. Do the normal wheel nuts fit the stud's? Cheers for the pic I'm in St-Leonards O/S, Hastings, Yes they take normal Toyota nuts, and as for clearance, just add 15mm to the outside of your tyre, if you have that then you should be fine, if not you can get arches rolled;) Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 1, 2008 Author Share Posted October 1, 2008 New item added, if i have missed replying to anyone, please let me know:) Link to comment Share on other sites More sharing options...
RobSheffield Posted October 1, 2008 Share Posted October 1, 2008 HKS 256 inlet cam, sold to me as unused, and certainly looks it, i would like £175 for this, otherwise it will go on ebay for more;) Wow, look at that club spirit Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 1, 2008 Author Share Posted October 1, 2008 Wow, look at that club spirit Hmm! interesting, the Supra club now owns Ebay:rolleyes: Link to comment Share on other sites More sharing options...
RobSheffield Posted October 1, 2008 Share Posted October 1, 2008 Hmm! interesting, the Supra club now owns Ebay:rolleyes: No you tit, i was taking the piss Obviously its spirited of you to offer them lower on here Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 2, 2008 Author Share Posted October 2, 2008 Main post updated:) Link to comment Share on other sites More sharing options...
bennyc45 Posted October 2, 2008 Share Posted October 2, 2008 Inductio kit still for sale? PM'D Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 2, 2008 Author Share Posted October 2, 2008 Inductio kit still for sale? PM'D Pics sent! bump! Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 4, 2008 Author Share Posted October 4, 2008 Still got cams and a few more bits to go:) Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 7, 2008 Author Share Posted October 7, 2008 Bump! Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 8, 2008 Author Share Posted October 8, 2008 Cam will be going on Ebay at the weekend, may also have an assortment of Mikalor Clamps, when i sort out the sizes. Link to comment Share on other sites More sharing options...
Luka-P Posted October 8, 2008 Share Posted October 8, 2008 Have you got a pair of cams Dick? Or just the one? PM me to discuss ... Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 9, 2008 Author Share Posted October 9, 2008 Have you got a pair of cams Dick? Or just the one? PM me to discuss ... You have PM Luke. Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 10, 2008 Author Share Posted October 10, 2008 Main post updated. Link to comment Share on other sites More sharing options...
Recommended Posts