StuartW Posted July 17, 2008 Share Posted July 17, 2008 SOLD£250 650 prescision 550HP capable. Done less than 500miles. These Cost £450 new when bought less than a year ago £285 delivered will do for a N/A-T,BPU++, TT/Big single but the TT will need aftermarket rail, you can get good copies from eBay for £59.99 http://cgi.ebay.co.uk/Toyota-Fuel-Rail-JZA80-MKIV-Supra-2JZ-GTE-TOP-FEED_W0QQitemZ150318259037QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item150318259037&_trksid=p3286.c0.m14&_trkparms=72%3A1301%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318 for an N/A-t they are a direct fit. High impedance so no resistors needed. Clips also available for extra £25 or just use speaker spade crimpits Link to comment Share on other sites More sharing options...
StuartW Posted September 23, 2008 Author Share Posted September 23, 2008 Bump Link to comment Share on other sites More sharing options...
Wez Posted September 23, 2008 Share Posted September 23, 2008 RyanG was after some injectors Link to comment Share on other sites More sharing options...
miles davenport Posted September 23, 2008 Share Posted September 23, 2008 hi ya , how much for the rail and is there any discount for both items ,works a bit slow at the moment so any help would be appreciated,are you syre they will work on a tt using a n/a fuel rail,apologise for being thick if i miss understood:search: Link to comment Share on other sites More sharing options...
Dazzi Posted October 27, 2008 Share Posted October 27, 2008 Have you got a pic of the injectors installed? I would of thought 650cc is a bit over the top for 300 ish hp? Link to comment Share on other sites More sharing options...
StuartW Posted October 28, 2008 Author Share Posted October 28, 2008 Have you got a pic of the injectors installed? I would of thought 650cc is a bit over the top for 300 ish hp? These dont even need a resistor pack I had these when my 440's from a mk3 didnt supply enough fuel @ 1 Bar and i melted the pistons in my first N/A-T. Better off safer than sorry. They are great quality and have a 4 jet spray pattern. Link to comment Share on other sites More sharing options...
StuartW Posted December 22, 2008 Author Share Posted December 22, 2008 Bumpsky...Merry Christmas all... Link to comment Share on other sites More sharing options...
StuartW Posted December 28, 2008 Author Share Posted December 28, 2008 after xmas bump la la la la.... Link to comment Share on other sites More sharing options...
_Shane_ Posted December 28, 2008 Share Posted December 28, 2008 what rail is needed for precision injectors ? Link to comment Share on other sites More sharing options...
StuartW Posted December 29, 2008 Author Share Posted December 29, 2008 what rail is needed for precision injectors ? This one on eBay will work fine, in stock in the UK £59.99 its an exact HKS copy and looks Bling! This will flow much better than a std rail and will accept an FPR much easier I can guarantee this will 100% fit and the Aluminium collars etc will allow my Injectors to fit perfectly. The HKS equivalent is over £200! http://cgi.ebay.co.uk/Toyota-Fuel-Rail-JZA80-MKIV-Supra-2JZ-GTE-TOP-FEED_W0QQitemZ150318259037QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item150318259037&_trksid=p3286.c0.m14&_trkparms=72%3A1301%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318 Link to comment Share on other sites More sharing options...
StuartW Posted January 8, 2009 Author Share Posted January 8, 2009 Bump..Before they go on eBay Link to comment Share on other sites More sharing options...
StuartW Posted January 8, 2009 Author Share Posted January 8, 2009 £270 inc clips and carriage Link to comment Share on other sites More sharing options...
StuartW Posted January 14, 2009 Author Share Posted January 14, 2009 Another Bump Link to comment Share on other sites More sharing options...
StuartW Posted January 24, 2009 Author Share Posted January 24, 2009 final reduction before eBay £250 inc delivery uk mainland. Link to comment Share on other sites More sharing options...
johnd-mkiv Posted January 24, 2009 Share Posted January 24, 2009 does any one kn ow if they will fit a 1jz will be looking at an after market rail for it Link to comment Share on other sites More sharing options...
StuartW Posted January 25, 2009 Author Share Posted January 25, 2009 does any one kn ow if they will fit a 1jz will be looking at an after market rail for it YES they will fit straight in! Originally i had these to drop in on my MKiv N/A-T with standard fuel rail, That was after i had used mk3 440cc from a single turbo 1JZ. SO they should fit 100% mate. and i am pretty sure you wont even need a resistor pack on the 1JZ. Any news on the tanks mate.. Stuart Link to comment Share on other sites More sharing options...
StuartW Posted February 7, 2009 Author Share Posted February 7, 2009 cannot believe i still got these lil buggers! BUMP Link to comment Share on other sites More sharing options...
bromy Posted February 8, 2009 Share Posted February 8, 2009 Get them on ebay, I want a bargain Link to comment Share on other sites More sharing options...
StuartW Posted February 8, 2009 Author Share Posted February 8, 2009 ok will list on fleabay asap and add a link from here Link to comment Share on other sites More sharing options...
StuartW Posted February 27, 2009 Author Share Posted February 27, 2009 havent had time to go on ebay yet so BUMP Link to comment Share on other sites More sharing options...
StuartW Posted March 31, 2009 Author Share Posted March 31, 2009 These had sold to a member but upon arrival they appear to be Siemens injectors NOT Prescision! I was sold them as Prescision, I dont really see what difference it makes as they are top quality as the flow testing confirms... Anyways BACK UP FOR SALE Link to comment Share on other sites More sharing options...
_Shane_ Posted March 31, 2009 Share Posted March 31, 2009 must explain why my precision wont fit that rail Link to comment Share on other sites More sharing options...
DODGYDODDS Posted April 1, 2009 Share Posted April 1, 2009 other than needing a rail for a tt, that all that would be needed for these to fit mate Dont worry just read they're for the 1jz Link to comment Share on other sites More sharing options...
StuartW Posted April 1, 2009 Author Share Posted April 1, 2009 must explain why my precision wont fit that rail Sorry dont understand what you mean Link to comment Share on other sites More sharing options...
_Shane_ Posted April 1, 2009 Share Posted April 1, 2009 remember i was talking to you about a rail for the ''precision'' injectors and you said the hks copy rails will work fine etc , i bought one then as i have precision injectors here in the box and they wouldnt fit the rail Precision will only fit US brand rails like Titan, SP, boost logic etc Link to comment Share on other sites More sharing options...
Recommended Posts