Supra Noodle Posted July 19, 2008 Share Posted July 19, 2008 Just looking for any info regarding an Na to TT conversion. I have a 96 Na manual 6 speed and may have sourced a TT lump with loom and ecu. Question is am i going to encounter problems because the engine/clutch is from an auto? Any advice or links would be much appreciated. Quote Link to comment Share on other sites More sharing options...
dibbleyuk Posted July 19, 2008 Share Posted July 19, 2008 I know alot of people have used engines from autos i dont know if there is any diffrences as mine was from a manual but someone will be along soon to help im sure Quote Link to comment Share on other sites More sharing options...
miko_supra Posted July 19, 2008 Share Posted July 19, 2008 AFAIK you just need to whack on a manual fly wheel and then you are left with a couple of gearbox connectors which you cant use, but have to short out on one another. I think i mentioned it in my write up somewhere Quote Link to comment Share on other sites More sharing options...
Supra Noodle Posted July 19, 2008 Author Share Posted July 19, 2008 Miko, Did you use the ecu and loom from an auto? I've heard that an auto ecu will run in a manual. Will do a search for your write up. Quote Link to comment Share on other sites More sharing options...
miko_supra Posted July 19, 2008 Share Posted July 19, 2008 My engine and looms are from a manual TT, but i am using an auto ecu with no issues Quote Link to comment Share on other sites More sharing options...
Scooter Posted July 20, 2008 Share Posted July 20, 2008 There is a little wiring issue with converting the facelift NA's Have a read of this thread and contact Jeff (2JG) he let you know his experience of it i'm sure... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.