jot_ie Posted July 22, 2005 Share Posted July 22, 2005 1998 supra epc Does anyone know if this is available and where? I am particularly looking for part numbers and assembly numbers for the 1998 suspension including the reas system. John Quote Link to comment Share on other sites More sharing options...
merckx Posted July 22, 2005 Share Posted July 22, 2005 Have you looked on Ebay, wouldn't mind getting one if they're any good! http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=14778&item=4563392691&rd=1&ssPageName=WDVW http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=18436&item=7987613270&rd=1&ssPageName=WDVW Quote Link to comment Share on other sites More sharing options...
jot_ie Posted July 22, 2005 Author Share Posted July 22, 2005 I wouldnt mind picking it up. I am a bit sceptical as to what it contains though. Also says its for windows xp only. John Quote Link to comment Share on other sites More sharing options...
paulfurn Posted July 22, 2005 Share Posted July 22, 2005 Ive just bought a 2002 EPC (apparently) from ebay, though its probably exactly the same as all the others! Ill let you know what its like when I get it, and, if it is different Ill upload it somewhere. Quote Link to comment Share on other sites More sharing options...
jot_ie Posted July 22, 2005 Author Share Posted July 22, 2005 Thanks Paul Good of you. John Quote Link to comment Share on other sites More sharing options...
merckx Posted August 1, 2005 Share Posted August 1, 2005 Ive just bought a 2002 EPC (apparently) from ebay, though its probably exactly the same as all the others! Ill let you know what its like when I get it, and, if it is different Ill upload it somewhere. Have you got it yet, any good? Quote Link to comment Share on other sites More sharing options...
paulfurn Posted August 1, 2005 Share Posted August 1, 2005 No, the c*nt took my money and never sent anything. Ive raised it with Paypal and am awaiting my money back. His name on ebay was www_ebookmanuals_com and I have his name and address, though I hardly think its worth going down to rattle someone over a few quid.... Sorry guys Quote Link to comment Share on other sites More sharing options...
merckx Posted August 1, 2005 Share Posted August 1, 2005 Tw@t! I'll try someone else on Ebay. Quote Link to comment Share on other sites More sharing options...
merckx Posted August 20, 2005 Share Posted August 20, 2005 Just got one of these EPC - electronic parts catalogue off Ebay I know a few people were enquiring about these. Well , it appears to work okay. http://cgi.ebay.co.uk/TOYOTA-Factory-EPC-on-7CDs-a-true-must_W0QQitemZ7993493613QQcategoryZ18436QQrdZ1QQcmdZViewItem Quote Link to comment Share on other sites More sharing options...
Jake Posted August 20, 2005 Share Posted August 20, 2005 Just got one of these EPC - electronic parts catalogue off Ebay I know a few people were enquiring about these. Well , it appears to work okay. http://cgi.ebay.co.uk/TOYOTA-Factory-EPC-on-7CDs-a-true-must_W0QQitemZ7993493613QQcategoryZ18436QQrdZ1QQcmdZViewItem Did it install ok on XP without any messing about? Does it have VVTi Supra part numbers? Quote Link to comment Share on other sites More sharing options...
Nic Posted August 20, 2005 Share Posted August 20, 2005 Did it install ok on XP without any messing about? Does it have VVTi Supra part numbers? Jake, I've just had to reinstall mine and having problems with the CD setup on XP, I had it up and running before so know it is possible, can't remember how I did it though. Any ideas? Quote Link to comment Share on other sites More sharing options...
merckx Posted August 20, 2005 Share Posted August 20, 2005 Did it install ok on XP without any messing about? Does it have VVTi Supra part numbers? I've got XP, It didn't have the install for XP option. But I installed it for Win 98 and it's working fine. There's one CD that installs the operating system on the hard disc, all of the data for the J spec Supra appears to be on one CD which you leave in the drive. I wasn't sure how to save it on the hard disc , must be possible though. To tell if you're getting VVTI part numbers I'll have to search for something on the engine, any suggestions? Maybe a part number that I can verify. It's accepting valid chassis numbers upto Dec 2000. Quote Link to comment Share on other sites More sharing options...
colsoop Posted August 20, 2005 Share Posted August 20, 2005 I set up a partition of 1.5 gb especially for the Epc to install too as it has problems with large hard drives. Once the program is installed go to cd setup. Check the box that says japan area version. click add and select A1 CD ROM Then press F10 or Execute. It will ask for the japan A1 CD Insert the cd. Ok it and that should copy the files to your Directory where the program was originally installed too. When that is done Go to Initial setup and select "japanese" Then Press F10 or execute. Go back to the main menu and click "part number translation" search for sup. If it worked you should only have one option when you search. Go to Model and click Search you should get the full model listing for the japanese supras e.g RZ GZ etc. I think the above is right but haven't installed it in a while Quote Link to comment Share on other sites More sharing options...
colsoop Posted August 20, 2005 Share Posted August 20, 2005 I've got XP, It didn't have the install for XP option. But I installed it for Win 98 and it's working fine. There's one CD that installs the operating system on the hard disc, all of the data for the J spec Supra appears to be on one CD which you leave in the drive. I wasn't sure how to save it on the hard disc , must be possible though. To tell if you're getting VVTI part numbers I'll have to search for something on the engine, any suggestions? Maybe a part number that I can verify. It's accepting valid chassis numbers upto Dec 2000. Have a search for the plastic cam cover Quote Link to comment Share on other sites More sharing options...
merckx Posted August 20, 2005 Share Posted August 20, 2005 Does it have VVTi Supra part numbers? Well, I've just found the part number for the MAF sensor , it matches one I found in an earlier post. Also the rocker cover, it gives a different part number for post Sept 97 cars which I presume is when the VVTI was introduced. Quote Link to comment Share on other sites More sharing options...
Jake Posted August 22, 2005 Share Posted August 22, 2005 Jake, I've just had to reinstall mine and having problems with the CD setup on XP, I had it up and running before so know it is possible, can't remember how I did it though. Any ideas?I've got the same problem Nic, can't get mine working either Quote Link to comment Share on other sites More sharing options...
Alex Posted August 22, 2005 Share Posted August 22, 2005 Merckx - the VVTi's Throttle Body is completely different...does it list different parts for that? If it does can you give me all the part no.s please? Cheers Alex Quote Link to comment Share on other sites More sharing options...
colsoop Posted August 22, 2005 Share Posted August 22, 2005 I've got the same problem Nic, can't get mine working either Did the directions on page 1 not work?? If not i moght reinstall mine and write down each stage. Quote Link to comment Share on other sites More sharing options...
merckx Posted August 22, 2005 Share Posted August 22, 2005 Merckx - the VVTi's Throttle Body is completely different...does it list different parts for that? If it does can you give me all the part no.s please? Cheers Alex Alex, looks like there's one part number for all the bits in the pic (apart from throttle position sensor which is listed separately) Throttle assembly as in pic (22210) : 22030-46160 Couldn't figure how to get a copy of the screen so I took a pic of it Quote Link to comment Share on other sites More sharing options...
Jake Posted August 22, 2005 Share Posted August 22, 2005 Couldn't figure how to get a copy of the screen so I took a pic of it LOL! Doesn't Alt PrtScrn work? Quote Link to comment Share on other sites More sharing options...
Jake Posted August 22, 2005 Share Posted August 22, 2005 Did the directions on page 1 not work?? Page one? Quote Link to comment Share on other sites More sharing options...
colsoop Posted August 22, 2005 Share Posted August 22, 2005 Here Couldn't figure how to get a copy of the screen so I took a pic of it Press the prt scr key located above insert, this copies everything that is on the monitor when you press it. Then go in to your usual paint program and press ctrl and v or paste this will dump the image in to your paint program. Quote Link to comment Share on other sites More sharing options...
merckx Posted August 22, 2005 Share Posted August 22, 2005 LOL! Doesn't Alt PrtScrn work? LOL Never knew that, cheers Jake Quote Link to comment Share on other sites More sharing options...
Jake Posted August 22, 2005 Share Posted August 22, 2005 Press the prt scr key located above insert, this copies everything that is on the monitor when you press it. Then go in to your usual paint program and press ctrl and v or paste this will dump the image in to your paint program. I prefer Alt PrtScrn because it captures just the active window rather than everything on the screen. Quote Link to comment Share on other sites More sharing options...
colsoop Posted August 22, 2005 Share Posted August 22, 2005 Good tip Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.