bodilx6 Posted October 7, 2009 Share Posted October 7, 2009 What is the forward protusion of the stock UK brake caliper? The measure is from the hub contact point to the outer edge of the caliper, to know what clearance is needed for a rim. Like the "D" under here: http://www.imagewheels.co.uk/images/tech_spec.jpg Quote Link to comment Share on other sites More sharing options...
bodilx6 Posted October 8, 2009 Author Share Posted October 8, 2009 anyone? Quote Link to comment Share on other sites More sharing options...
garethr Posted October 8, 2009 Share Posted October 8, 2009 IIRC you need about 70mm clearance from the disc to the wheel. Quote Link to comment Share on other sites More sharing options...
bodilx6 Posted October 9, 2009 Author Share Posted October 9, 2009 Thx If anybody remember different, please chime in Quote Link to comment Share on other sites More sharing options...
pedrosixfour Posted October 9, 2009 Share Posted October 9, 2009 The measurement from wheel attachment surface of brake disc to outer edge of UK spec brake caliper is 39.1mm Toyota then left a further 10mm between the caliper and the inner edge of the wheel spokes. Quote Link to comment Share on other sites More sharing options...
pedrosixfour Posted October 9, 2009 Share Posted October 9, 2009 Knew it was here somewhere! http://www.mkivsupra.net/vbb/attachment.php?attachmentid=74033&d=1208177475 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.