FOSTA Posted April 3, 2012 Share Posted April 3, 2012 I'm relocating my pas reservoir this weekend and wanted to know where you guys mounted yours? I dont want it on the strut as I want to keep the sides clear and as tidy as I can. So I was thinking of fitting mine in place of the stock header tank (over flow bottle) used to be, inbetween the front bumper and the front slam panel. Would this work ok there? Also could you post up pictures of where you guys have relocated yours to (If you have any and don't mind ) Big thanks Link to comment Share on other sites More sharing options...
hodge Posted April 3, 2012 Share Posted April 3, 2012 That's where mine is fitted Link to comment Share on other sites More sharing options...
FOSTA Posted April 3, 2012 Author Share Posted April 3, 2012 That's where mine is fitted Have you got a pic dude? I can't be botherd to spend 3hours looking through your build thread again pmsl Link to comment Share on other sites More sharing options...
pjavon Posted April 4, 2012 Share Posted April 4, 2012 I guess you need a TT power steering pump to move the reservoir as well as the bottle itself? Sounds a good idea to me:) Link to comment Share on other sites More sharing options...
FOSTA Posted April 4, 2012 Author Share Posted April 4, 2012 I guess you need a TT power steering pump to move the reservoir as well as the bottle itself? Sounds a good idea to me:) No mate you need a TT suction port union 44337-24020, suction port union O-Ring 90301-11016, TT reservoir and some 16mm hose and 10mm hose to relocate it Link to comment Share on other sites More sharing options...
Dazzi Posted June 25, 2012 Share Posted June 25, 2012 No mate you need a TT suction port union 44337-24020, suction port union O-Ring 90301-11016, TT reservoir and some 16mm hose and 10mm hose to relocate it Where did you get the suction port union from and how much in total? Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted June 25, 2012 Share Posted June 25, 2012 Fit a na tank straight onto the pump. I think its by far the neatest location and looks stock. Link to comment Share on other sites More sharing options...
Dazzi Posted June 25, 2012 Share Posted June 25, 2012 Not enough room lol Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted June 25, 2012 Share Posted June 25, 2012 Not enough room lol What inlet manifold is he running then? Link to comment Share on other sites More sharing options...
Noz Posted June 25, 2012 Share Posted June 25, 2012 All FFIM are different angles depending on make, I've seen some NA intakes comes out with such an angle you couldn't mount it in the usual place (alot seem to mount it where the TT pas goes). I would say fit the intake and see what locations are handy. Link to comment Share on other sites More sharing options...
FOSTA Posted June 25, 2012 Author Share Posted June 25, 2012 Where did you get the suction port union from and how much in total? I got it from Toyota using the part number above mate, I can't remember the price but not much Link to comment Share on other sites More sharing options...
FOSTA Posted June 25, 2012 Author Share Posted June 25, 2012 What inlet manifold is he running then? Ive got a ks racing ffim mate with NA runners so I need to relocate the stock NA pas tank to clear Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now