jevansio Posted December 8, 2007 Share Posted December 8, 2007 Met up with Michel & Ryan this morning ready for this afternoons mapping session. Ryan started out by sorting my problem when I blip the accelerator, it always used to drop a couple hundred rpm before picking up, now it revs straight up . He then tweaked the map as we headed to Motoscope, once there I was 1st on & Ryan set about his business. For once I had a event free dyno session, ended up with 500 rwhp @ 1.1 BAR. This compares with my previous best of 500 rwhp @ 1.3 BAR (I do have a 0.81 housing on now though & not a 0.68). He's pulled a little timing out for the time being & beleives there is a lot more to come from the car (hopefully including running her back at 1.4 BAR). All in all I am over the moon with todays performance by Ryan, the throttle response has never been as good as it is now. It was too wet & cold to open it up on the way home. Next stop is an oil change, plug change & a set of R888's as we were struggling for grip after 6000 rpm, then back for more. Looks like you've done it again Ryan Link to comment Share on other sites More sharing options...
Kopite Posted December 8, 2007 Share Posted December 8, 2007 Was gutted I couldn't make today, still stuck in Liverpool! Was meant to be out tonight too! Good work done though by the sounds of it! Link to comment Share on other sites More sharing options...
Gaz Walker Posted December 8, 2007 Share Posted December 8, 2007 Well done mate. Knows his stuff doesn't he Gaz. Link to comment Share on other sites More sharing options...
JamieP Posted December 8, 2007 Share Posted December 8, 2007 Thats gonna be fast at 1.4bar:cool: Link to comment Share on other sites More sharing options...
jevansio Posted December 8, 2007 Author Share Posted December 8, 2007 Was gutted I couldn't make today, still stuck in Liverpool! Was meant to be out tonight too! Good work done though by the sounds of it! Yeah Michel said you were coming Ro, you missed some mean bacon butties Well done mate. Knows his stuff doesn't he Gaz. Cheers Gaz, I was impressed! Link to comment Share on other sites More sharing options...
jevansio Posted December 8, 2007 Author Share Posted December 8, 2007 Thats gonna be fast at 1.4bar:cool: I hope so, I always use your old car as the benchmark I want to reach, esp that 180 lepton speedo pull Link to comment Share on other sites More sharing options...
JamieP Posted December 8, 2007 Share Posted December 8, 2007 Lets hope yours is more reliable than mine;) Link to comment Share on other sites More sharing options...
jevansio Posted December 8, 2007 Author Share Posted December 8, 2007 Lets hope yours is more reliable than mine;) I do my pray to the God of Diffs every night Link to comment Share on other sites More sharing options...
JamieP Posted December 8, 2007 Share Posted December 8, 2007 I do my pray to the God of Diffs every night Dont forget the engine/gearbox and turbo gods:D Link to comment Share on other sites More sharing options...
Gaz Walker Posted December 8, 2007 Share Posted December 8, 2007 Lol. Are you going to JNE tomorrow mate? Heard from Lew/John/Steve et al if they are going? Gaz. Link to comment Share on other sites More sharing options...
Ryan.G Posted December 8, 2007 Share Posted December 8, 2007 Hey Jay Glad your happy mate Took abit longer than exspected but this was no tweak, started from scratch basically. The old map is now in my recycle bin Was very happy when i got the throttle response good as you did say i wont be able to do it. That made it a challenge Couldn't believe how hot your turbo had been getting never seen a exhaust trim that white in my life but what do you expect from 1100c EGT's. All sorted now though. Highest Peak was 930c on the long 5th run now Cya tomorrow mate, Off out with JJ tonight Link to comment Share on other sites More sharing options...
rob wild Posted December 8, 2007 Share Posted December 8, 2007 Met up with Michel & Ryan this morning ready for this afternoons mapping session. Ryan started out by sorting my problem when I blip the accelerator, it always used to drop a couple hundred rpm before picking up, now it revs straight up . He then tweaked the map as we headed to Motoscope, once there I was 1st on & Ryan set about his business. For once I had a event free dyno session, ended up with 500 rwhp @ 1.1 BAR. This compares with my previous best of 500 rwhp @ 1.3 BAR (I do have a 0.81 housing on now though & not a 0.68). He's pulled a little timing out for the time being & beleives there is a lot more to come from the car (hopefully including running her back at 1.4 BAR). All in all I am over the moon with todays performance by Ryan, the throttle response has never been as good as it is now. It was too wet & cold to open it up on the way home. Next stop is an oil change, plug change & a set of R888's as we were struggling for grip after 6000 rpm, then back for more. Looks like you've done it again Ryan That's excellent news! i hope he can do mine Who mapped it before? Was gutted I couldn't make today, still stuck in Liverpool! Was meant to be out tonight too! Good work done though by the sounds of it! Doh! Any chance of posting it matey? Link to comment Share on other sites More sharing options...
Kopite Posted December 8, 2007 Share Posted December 8, 2007 Doh! Any chance of posting it matey? I'm still heading back up tonight and will drop it in at Michel's tomorrow, should have seen the weather today! As you know from Thurs night i'm not bothered about hammering it in the rain, today i was afraid to even get in the thing though!! Link to comment Share on other sites More sharing options...
jevansio Posted December 8, 2007 Author Share Posted December 8, 2007 Are you going to JNE tomorrow mate? Heard from Lew/John/Steve et al if they are going? I'm meeting up with Ryan tomorrow to get a bit of road tuning done, but should be able to make it up there for around 2, you going? Haven't heard from the guys but would suspect they're all going. Hey Jay Glad your happy mate Took abit longer than exspected but this was no tweak, started from scratch basically. The old map is now in my recycle bin Was very happy when i got the throttle response good as you did say i wont be able to do it. That made it a challenge Couldn't believe how hot your turbo had been getting never seen a exhaust trim that white in my life but what do you expect from 1100c EGT's. All sorted now though. Highest Peak was 930c on the long 5th run now Cya tomorrow mate, Off out with JJ tonight Enjoy yourself bud, you deserve it That's excellent news! i hope he can do mine Who mapped it before? Dan Turner previously mapped it. Link to comment Share on other sites More sharing options...
Muffleman Posted December 8, 2007 Share Posted December 8, 2007 Great to hear mate Link to comment Share on other sites More sharing options...
Gaz Walker Posted December 8, 2007 Share Posted December 8, 2007 I'm meeting up with Ryan tomorrow to get a bit of road tuning done, but should be able to make it up there for around 2, you going? Haven't heard from the guys but would suspect they're all going. Yeah I'll try and pop up, as long as its not pissing down. Link to comment Share on other sites More sharing options...
rob wild Posted December 8, 2007 Share Posted December 8, 2007 I'm still heading back up tonight and will drop it in at Michel's tomorrow, should have seen the weather today! As you know from Thurs night i'm not bothered about hammering it in the rain, today i was afraid to even get in the thing though!! Nice one Cheer matey, yeah can't believe how well your car handled in those conditions Top drivers car you have there! Link to comment Share on other sites More sharing options...
jevansio Posted December 8, 2007 Author Share Posted December 8, 2007 Great to hear mate Cheers Matt, I'm well pleased Link to comment Share on other sites More sharing options...
Homer Posted December 8, 2007 Share Posted December 8, 2007 Good to hear Jay Thats some very impressive power at low boost, it'll be an animal at 1.4bar! What was the power with the Dan turdner map? Link to comment Share on other sites More sharing options...
Mr. Fish Posted December 8, 2007 Share Posted December 8, 2007 nice result on 1.0 bar waiting to hear the results when its mapped for 1.4 Link to comment Share on other sites More sharing options...
Mike B Posted December 8, 2007 Share Posted December 8, 2007 Jay!! Good stuff! what did I tell you about that housing!.. big difference hugh? like a different car? and although Ryan has helped, i recon the response is down to the housing; my car felt so much more responsive too; wait till you get it to 1.5 bar. Night and day. I went from a tentative 1.35 bar to 1.5 now with no issues, low temperatures and I would be interested to see what you are making by the time you get it to 1.4 / 1.5. I had new wheels and tyres today, big difference too, but not the sort of day for wot on the road... Link to comment Share on other sites More sharing options...
Ryan.G Posted December 8, 2007 Share Posted December 8, 2007 what did I tell you about that housing!.. big difference hugh? like a different car? and although Ryan has helped, i recon the response is down to the housing; my car felt so much more responsive too; wait till you get it to 1.5 bar. Night and day. The reponse jay was talking about Mike is just the acceleration enrichment for his larger TB and Manifold. You would rev the car from idle or under 3k and would delay badly. With a larger opening more fuel is needed to enrichement the mixture on sudden throttle movements. Jays needed a fair amount of fuel to create a good burn. Would just keep going lean and stuttering before. Hopefully it will be dry in areas tomorrow to feel the cars full potential. Link to comment Share on other sites More sharing options...
jevansio Posted December 8, 2007 Author Share Posted December 8, 2007 Good to hear Jay Thats some very impressive power at low boost, it'll be an animal at 1.4bar! What was the power with the Dan turdner map? Cheers Darryl, the power with Dan was exactly the same (500 rwhp) only that was @ 1.3 BAR rather than 1.1 BAR, but I do have a 0.81 housing now which changes things again. One of the biggest things that has impressed me with Ryan is not the way he's mapped the car on WOT, it's the way the throttle response is now near perfect. nice result on 1.0 bar waiting to hear the results when its mapped for 1.4 Me too Jay!! Good stuff! what did I tell you about that housing!.. big difference hugh? like a different car? and although Ryan has helped, i recon the response is down to the housing; my car felt so much more responsive too; wait till you get it to 1.5 bar. Night and day. I went from a tentative 1.35 bar to 1.5 now with no issues, low temperatures and I would be interested to see what you are making by the time you get it to 1.4 / 1.5. I had new wheels and tyres today, big difference too, but not the sort of day for wot on the road... I've not had a chance to really push it yet Mike but boy am I pleased I changed housing, both Ryans map & the housing have played a great part in it IMHO. I can't wait to see what she's like @ 1.4 with this hosuing. I'm just praying for some dry days now Link to comment Share on other sites More sharing options...
jevansio Posted December 8, 2007 Author Share Posted December 8, 2007 Hope I'm not bigging you up too much here Ryan for the "moderators" Link to comment Share on other sites More sharing options...
Homer Posted December 8, 2007 Share Posted December 8, 2007 Ah cool, gotcha One of the biggest things that has impressed me with Ryan is not the way he's mapped the car on WOT, it's the way the throttle response is now near perfect. That was what impressed me after mine was mapped, it wasn't so much the peak power, but the way it ran off boost and during spool. It drove like stock off boost and on the dyno it had exactly the same spool as the T61's. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now