brianwe Posted December 4, 2007 Share Posted December 4, 2007 Hi Im after a Jap-spec front cat pipe for a twin turbo Supra, and a sump for the same car. Any usable condition will suffice, as I got the car without one & for MOT purposes, i need one prior to mid-January! If anyone has one of these off a previously damaged vehicle, by all means do PM me and we can see about couriering it over to me for fitting. Big thanks all Bri Link to comment Share on other sites More sharing options...
Scooter Posted December 4, 2007 Share Posted December 4, 2007 what sump bit do you need? the thin lowest metal section or this and the more solid cast ali piece too? Link to comment Share on other sites More sharing options...
brianwe Posted December 4, 2007 Author Share Posted December 4, 2007 what sump bit do you need? the thin lowest metal section or this and the more solid cast ali piece too? I need the thin metal catch tray section with the bolt hole in it, as on mine the threads gone and is constantly dripping oil..... Getting an oil change soon so will change it then. Cheers, do you have one and how much for it? Bri Link to comment Share on other sites More sharing options...
Guest mk47 Posted December 4, 2007 Share Posted December 4, 2007 Hi i have a very good condition front cat Link to comment Share on other sites More sharing options...
Guest Bainesy36 Posted December 4, 2007 Share Posted December 4, 2007 Front cat here aswell if interested. Link to comment Share on other sites More sharing options...
razza Posted December 4, 2007 Share Posted December 4, 2007 and here;) Link to comment Share on other sites More sharing options...
Scooter Posted December 4, 2007 Share Posted December 4, 2007 I need the thin metal catch tray section with the bolt hole in it, as on mine the threads gone and is constantly dripping oil..... Getting an oil change soon so will change it then. Cheers, do you have one and how much for it? Bri do you realise you can't just swap them in situ? You have to drop the subframe, which is quite involved....... It 'may' be better to try and retap the sump hole and get a larger sump plug/nut. Link to comment Share on other sites More sharing options...
Scooter Posted December 4, 2007 Share Posted December 4, 2007 bri if you are anywhere near Chris Wilson (Click here) you could do alot worse than pop to see him for the oil change as i'm sure he could sort your problem out too. Link to comment Share on other sites More sharing options...
Ibrar Jabbar Posted December 4, 2007 Share Posted December 4, 2007 do you realise you can't just swap them in situ? You have to drop the subframe, which is quite involved....... It 'may' be better to try and retap the sump hole and get a larger sump plug/nut. The lower tin sump will drop out without removing anything, Brian, I think I might have a cat pipe in my parts bin Link to comment Share on other sites More sharing options...
Scooter Posted December 4, 2007 Share Posted December 4, 2007 The lower tin sump will drop out without removing anything, Brian, I think I might have a cat pipe in my parts bin oh right opps! in that case i have just what he needs Link to comment Share on other sites More sharing options...
Recommended Posts