Jump to content
The mkiv Supra Owners Club

just crashed on way home :(


TurboBrett

Recommended Posts

just gone up tha arse of a fat landrover, well gutted:( drove fine the rest of the way home, just got home and gave it te once over, and at at first glance driver side wing, bonnet and possibly a new bumper maybe an air filter box, :( but after having a better look it seems to have a bent slam pannel:(

 

:taped::(

ill be back with picture in a bit

Link to comment
Share on other sites

Guest CoolsBlue

i know some people whove had a slit dent in the slam panel and were able to beat it out, but if the airbox is damaged then its gota be hard ish!

Link to comment
Share on other sites

i know some people whove had a slit dent in the slam panel and were able to beat it out, but if the airbox is damaged then its gota be hard ish!

 

you know what i recon i could pull it out but its all the knock on effects this creates:( the air box ist that bad its the could air feed over the slam pannel thats pushed over and give it a wollap(sp?) still needs new one tho :(,

 

its just soo annoying the other guy had scratches and a cracked pannel (plastic) and that was under his car but he was bit 'well well look what u have done now then' of a twat but my insurance will screw me for it :(

 

just been ringing round few places and a salvage yard round the corner (ish) have an 04 supra in might be able to get bonnet wing but on the other ist bad crash so doubt i can get much off it :(

 

dunno if tis will work trying to like to other supra

http://autos.blue-sock.com/clients/29/image_view.htm?image=image_view.htm?holder=1&pic[1]=182758.jpg&pic[2]=182754.jpg&pic[3]=182755.jpg&pic[4]=182756.jpg&pic[5]=182757.jpg&&total=5&progress=3

 

http://autos.blue-sock.com/clients/29/image_view.htm?image=image_view.htm?holder=1&pic[1]=182758.jpg&pic[2]=182754.jpg&pic[3]=182755.jpg&pic[4]=182756.jpg&pic[5]=182757.jpg&&total=5&progress=1

Link to comment
Share on other sites

lol sorry about size my phone like big pics :(

 

http://www.xlsite.com/minimanbrett/04122007144.jpg

 

http://www.xlsite.com/minimanbrett/04122007145.jpg

 

http://www.xlsite.com/minimanbrett/04122007146.jpg

 

http://www.xlsite.com/minimanbrett/04122007147.jpg

 

http://www.xlsite.com/minimanbrett/04122007148.jpg

 

 

Link to comment
Share on other sites

Guest CoolsBlue

not good:(will have to take alot of bits out to pull it out properly and spend a good few hours on it mate, i got a silver stock front you can have for £20:)

Link to comment
Share on other sites

yeah smally pics would help:p

 

CoolsBlue- might have to take you up on that one where you located?

 

the front chassis rails where do they run? accross the 'floor'? the lowest bump was about badge hight if so i might be in the clear (on that at least)

 

the paint damage on the lower of the bumper was there when i bought it and looks like its from a large stone + weather:sly:

 

was only this morning i was looking over some pictures to see whitch bonnet and bumper combo i like,:taped: just my luck i phooking need them now:rolleyes:

Link to comment
Share on other sites

yeah glad i missed the towbar;), would have been happier with the curb and the bush tho:) also it was a range rover :D i got them mixed :sly: at least i know why all the mums use them for the school runs round hear...they dont bend easy:cool:

 

 

just been looking through the faq on how to remove the front bumper clicky because i cant unscrew the plastic screws that dont unscrew:blink: but anyway anyone have the partnumber to hand as to what needs to be bought?

 

Bits I recommend buying before you do this:

Plastic fasteners for the top centre fixings (step 3 - under bonnet seal strip)

New plastic fasteners for the top inside of the mouth (step 4).

A new stud strip assembly and nuts (step 6).

Link to comment
Share on other sites

Guest Kazimodo

hi

sorry to see the damage to the soop,is it you everyday car or do you have other transport.

you were probably luckier it was a range rover then rather than the armoured tank like thingy that we have.

good luck with the mending,i am sure there will be lots of support on the site

all the best

kazx

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.