dandan Posted December 3, 2007 Share Posted December 3, 2007 Guys, Does Arnout have a full kit developed/commercialized yet? If not does anyone (other than PHR) have a cast manifold kit in the market? Are the IM kits available anywhere now? Cheers Dan Quote Link to comment Share on other sites More sharing options...
mikeyb10supra Posted December 3, 2007 Share Posted December 3, 2007 Yep....ive got one sitting at home, the manifold, downpipe wastegate fittings etc are all produced by arnout now, not sure how many he has made up though, you will need the wastegate and turbo though, if I remember correctly the hks 50mm wastegate mates up perfectly (the older rectangular style flange), anything else you will need to cut the flanges of the fittings and weld on new ones turbonetics also have a cast manifold as well I think? Quote Link to comment Share on other sites More sharing options...
carl0s Posted December 3, 2007 Share Posted December 3, 2007 I was thinking the same question I went over to supras.nl and looked at the online shop but didn't see much Have been considering sending him a mail or pm on his boards. Quote Link to comment Share on other sites More sharing options...
Muffleman Posted December 3, 2007 Share Posted December 3, 2007 You'll need to email him, PM wont work as he threw a big strop on here and refused to pay the £10 a year membership. Quote Link to comment Share on other sites More sharing options...
carl0s Posted December 3, 2007 Share Posted December 3, 2007 Yep, but he has his own board/forum so you could PM on there. Quote Link to comment Share on other sites More sharing options...
Muffleman Posted December 3, 2007 Share Posted December 3, 2007 Indeed Quote Link to comment Share on other sites More sharing options...
dandan Posted December 3, 2007 Author Share Posted December 3, 2007 Anyone have his email? Yep....ive got one sitting at home, the manifold, downpipe wastegate fittings etc are all produced by arnout now, not sure how many he has made up though, you will need the wastegate and turbo though, if I remember correctly the hks 50mm wastegate mates up perfectly (the older rectangular style flange), anything else you will need to cut the flanges of the fittings and weld on new ones turbonetics also have a cast manifold as well I think? Would you care to expand on how much it cost? Quote Link to comment Share on other sites More sharing options...
Wez Posted December 3, 2007 Share Posted December 3, 2007 IM no longer make cast manifold kits, they were based on the turbonetics manifold with the wastegate port enlarged and welded up. I also have an Arnout manifold which I havent fitted yet, it has a much larger internal volume and the wastegate port uses a 3 bolt flange instead of 2. Quote Link to comment Share on other sites More sharing options...
SimonB Posted December 3, 2007 Share Posted December 3, 2007 I have one of the first downpipes he made. Things to bear in mind are that as has been said only the older style HKS wastegate fits (unless he's changed them) which you can't buy any more. The Ebay clones used the same flange, but you wouldn't catch me using one of those! Also the downpipe mates up with a conventional 1st decat pipe for a UK spec which you will need. Most other kits mate up to the 2nd decat pipe. It took me a while to find a 3 inch 1st decat pipe, random technology make one in the USA which is very nice. Plus of course you will have to make up your own intercooler piping. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 3, 2007 Share Posted December 3, 2007 The best way to contact Arnout is to phone him. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.