captainchaos Posted November 28, 2007 Share Posted November 28, 2007 Could someone please tell me what colour wires go to what when replacing the standard boost sensor, thanks chris Link to comment Share on other sites More sharing options...
Ryan.G Posted November 28, 2007 Share Posted November 28, 2007 Have you got the AEM Pro Software? If so, Go to the directory where the software is saved and under aempro you will see instructions i.e C:\Program Files\AEM\AEMPro\Instructions When you are in this folder look for the file name 10-2130 for Sensors 30-2130-XXX.pdf All the info you need is in there to which pins on the sensor do what. Then just link them to the stock wiring. 5v pin goes to 5v supply wire (vcc) Ground goes to Sensors Ground wire (e2) - test with continuety check against intake manifold to make sure it is a ground. The Signal wire goes to Pim pin which will be the last pin left in the connect HTH Link to comment Share on other sites More sharing options...
captainchaos Posted November 28, 2007 Author Share Posted November 28, 2007 thanks very much great help, gold star for you Link to comment Share on other sites More sharing options...
AshBhp Posted November 28, 2007 Share Posted November 28, 2007 Link to comment Share on other sites More sharing options...
captainchaos Posted November 28, 2007 Author Share Posted November 28, 2007 ahhh no hang on ash gets the gold star and a 10p mix up Link to comment Share on other sites More sharing options...
Ryan.G Posted November 28, 2007 Share Posted November 28, 2007 Blimey Ash! Someone has way too much free time Link to comment Share on other sites More sharing options...
captainchaos Posted November 28, 2007 Author Share Posted November 28, 2007 thanks very much to both of you big help Link to comment Share on other sites More sharing options...
AshBhp Posted November 28, 2007 Share Posted November 28, 2007 Blimey Ash! Someone has way too much free time Na, credit to a mate of mine. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now