Rayman Posted November 17, 2007 Share Posted November 17, 2007 Ive fitted it fine but i need to know how to turn the bOV round, it says loosen the C clip to turn the bOV around on the adapter. I think you push the clip together but its really tight and in a small space. What do i use? Has anyone done this? Not sure if the old HKS bOv is the same? Quote Link to comment Share on other sites More sharing options...
Nic Posted November 17, 2007 Share Posted November 17, 2007 You'll need some circlip pliers, with an angled end like these: http://www.knipex.com/uploads/pics/sicherungsringzangen_01.jpg Quote Link to comment Share on other sites More sharing options...
RobSheffield Posted November 17, 2007 Share Posted November 17, 2007 You will need some circlip pliers with a 90 degree tip. Same bloody minute, at least he got a pic Quote Link to comment Share on other sites More sharing options...
Rayman Posted November 17, 2007 Author Share Posted November 17, 2007 Argh excellent, thats damn quick replying. So just squeeze the clip together to adjust!? Quote Link to comment Share on other sites More sharing options...
Nic Posted November 17, 2007 Share Posted November 17, 2007 Argh excellent, thats damn quick replying. So just squeeze the clip together to adjust!? The circlip fits into a slot that runs around the mounting for the BOV (I think from memory), it's just a sprung fit in the slot. You'll need to squeeze the ends of the circlip together until it is small enough to pull out of the slot. The circlip is quite strong, so you'll need a decent set of pliers with a longish handle to be able to prise the ends together. Quote Link to comment Share on other sites More sharing options...
Rayman Posted November 17, 2007 Author Share Posted November 17, 2007 Right thanks Nic and Rob, never even heard of them till now but i'll need a set as i prefer the bOV to face outwards plus i need to change the fin. Quote Link to comment Share on other sites More sharing options...
uk-rich Posted November 17, 2007 Share Posted November 17, 2007 just get hold of it and spin it, it only seals up against a o ring and will move round no probs Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.