QSC Posted November 16, 2007 Share Posted November 16, 2007 Red triangle light in rev counter comes on when I brake hard, stays on for 15 seconds or so then goes out again - anyone any ideas as to what would cause this ? Link to comment Share on other sites More sharing options...
GazB Posted November 16, 2007 Share Posted November 16, 2007 Abs? Link to comment Share on other sites More sharing options...
Ric Posted November 16, 2007 Share Posted November 16, 2007 Brake fluid, topup, even if it looks full Link to comment Share on other sites More sharing options...
Missile Posted November 16, 2007 Share Posted November 16, 2007 Low pad's, Handbrake sensor ???? Saying that, I don't thing the supra has a low pad sensor ??? As helpful as a choclate tea pot Sorry. Link to comment Share on other sites More sharing options...
AndyT Posted November 16, 2007 Share Posted November 16, 2007 Top your brake fluid up mate. It needs to be pretty full to cover the sensor. Did it on mine a while back. Link to comment Share on other sites More sharing options...
Havard Posted November 16, 2007 Share Posted November 16, 2007 You may have a bit of air in the system. Mine did this when we changed the caliper a couple of months back. Bled it again and voila! No light! Or just take the bulb out!! H. Edit - Fook me you have to be quick around here!!! Link to comment Share on other sites More sharing options...
QSC Posted November 16, 2007 Author Share Posted November 16, 2007 5 replies in two minutes lol - everyone on their lunch break eh ? Cheers chaps ---- Link to comment Share on other sites More sharing options...
Mike B Posted November 16, 2007 Share Posted November 16, 2007 OIL LEVEL probably just the brake fluid, but check everything, regularly!! Link to comment Share on other sites More sharing options...
QSC Posted November 16, 2007 Author Share Posted November 16, 2007 So I go out to open the bonnet to top up the fluid level, and lo...the bonnet catch doesn't work now - anyone have any tips as to how to undo the bonnet ? I have a Do-luck front & FMIC, so no room from the front of the car... Link to comment Share on other sites More sharing options...
Missile Posted November 16, 2007 Share Posted November 16, 2007 Angle grinder. Link to comment Share on other sites More sharing options...
QSC Posted November 16, 2007 Author Share Posted November 16, 2007 Angle grinder. hmmm...will a dremel do just as well ? It made a nice hole in the bonnet before someone filled it up with a scoop... Link to comment Share on other sites More sharing options...
Missile Posted November 16, 2007 Share Posted November 16, 2007 Yes mate. I belive they are just as good. Not as quick. But in all honesty, I bet thats going to be an awkward thing to sort. Link to comment Share on other sites More sharing options...
QSC Posted November 16, 2007 Author Share Posted November 16, 2007 Yes mate. I belive they are just as good. Not as quick. But in all honesty, I bet thats going to be an awkward thing to sort. Now everyone with bonnet pins is laughing at me... Link to comment Share on other sites More sharing options...
Missile Posted November 16, 2007 Share Posted November 16, 2007 This is only an idea. Could be rubbish. What if you took it to a local tyre exhaust centre and jack it up above you, And have a feel about. I'm unsure of the route the cable goes. But if you can find out you may be able to pull it and fit a new one. Link to comment Share on other sites More sharing options...
QSC Posted November 16, 2007 Author Share Posted November 16, 2007 Yeah, good thinking, the local place that does my MOTs are friendly enough (they don't notice my lack of CATs anyway) - a little job for them - Link to comment Share on other sites More sharing options...
Missile Posted November 16, 2007 Share Posted November 16, 2007 Good luck buddy..... Link to comment Share on other sites More sharing options...
Homer Posted November 16, 2007 Share Posted November 16, 2007 When you pull the level in the cabin does it feel like it's attached to anything? If not the cable might just have come off the level itself. Otherwise it's a nightmare to do, the juntion box that splits the cable into two has probably brorken, it's happened to quite a few on here. What front bumper do you have and is there an FMIC? Link to comment Share on other sites More sharing options...
QSC Posted November 17, 2007 Author Share Posted November 17, 2007 When you pull the level in the cabin does it feel like it's attached to anything? If not the cable might just have come off the level itself. Otherwise it's a nightmare to do, the juntion box that splits the cable into two has probably brorken, it's happened to quite a few on here. What front bumper do you have and is there an FMIC? The cable is attached to the handle, but doesn't feel like it's attached further down the line - got Do-Luck front & FMIC, so this ain't gonna be easy I fear... Link to comment Share on other sites More sharing options...
Suprash Posted November 19, 2007 Share Posted November 19, 2007 the bonnet catch doesn't work now - anyone have any tips as to how to undo the bonnet ? Tin opener....... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now