magictorch Posted November 13, 2007 Share Posted November 13, 2007 Hi Has somebody got a step by step guide to fitting a FMIC please? Tried searching but couldnt find anything with a blow by blow account of how to fit and what you have to move on a Jspec auto... Cheers Jamie Quote Link to comment Share on other sites More sharing options...
Ady Posted November 13, 2007 Share Posted November 13, 2007 Hi Has somebody got a step by step guide to fitting a FMIC please? Tried searching but couldnt find anything with a blow by blow account of how to fit and what you have to move on a Jspec auto... Cheers Jamie I need one of these as im going for a FMIC too A guide or instructions would be good Cheers Quote Link to comment Share on other sites More sharing options...
styggen82 Posted November 13, 2007 Share Posted November 13, 2007 http://www.mkiv.com/techarticles/greddy_fmic_for_stock_turbos/index.html http://www.mkiv.com/techarticles/greddy_fmic_manual/index.html http://www.mkiv.com/techarticles/hks_fmic_type-s/index.html http://www.mkiv.com/techarticles/hks_fmic_type-s/manual/index.html Quote Link to comment Share on other sites More sharing options...
hoff Posted November 13, 2007 Share Posted November 13, 2007 Jamie, if you need it doing give me a shout. Then I'll ask mike:p But if needed he'll do it im sure. His supra is back:eyebrows: Went to see it at lunch. Its looking pretty good. The spray job has made it look like a brand new car. We are going to give it a good look over tonight, but its 100% again. Cracking job:) Quote Link to comment Share on other sites More sharing options...
DamanC Posted November 13, 2007 Share Posted November 13, 2007 I used the greddy guide off of their website Quote Link to comment Share on other sites More sharing options...
dandan Posted November 13, 2007 Share Posted November 13, 2007 Fitting them is a piece of piss - it's ducting and sealing them properly that's the hard bit. Quote Link to comment Share on other sites More sharing options...
magictorch Posted November 13, 2007 Author Share Posted November 13, 2007 Hi Adam Hows it going mate? Jamie and i are going to have a go at fitting this sat morning but you know what im like with anything technical..lol Might come up and have a look at Mike's sup if your about next week;) Jamie Jamie, if you need it doing give me a shout. Then I'll ask mike:p But if needed he'll do it im sure. His supra is back:eyebrows: Went to see it at lunch. Its looking pretty good. The spray job has made it look like a brand new car. We are going to give it a good look over tonight, but its 100% again. Cracking job:) Quote Link to comment Share on other sites More sharing options...
magictorch Posted November 13, 2007 Author Share Posted November 13, 2007 Cheers for the replys so far,i have printed off the Greddy instructions;) Quote Link to comment Share on other sites More sharing options...
hoff Posted November 14, 2007 Share Posted November 14, 2007 Hi Adam Hows it going mate? Jamie and i are going to have a go at fitting this sat morning but you know what im like with anything technical..lol Might come up and have a look at Mike's sup if your about next week;) Jamie That sounds good mate. We worked on it last night. Just need to do the autobox now and it'll be ready:) Quote Link to comment Share on other sites More sharing options...
magictorch Posted November 14, 2007 Author Share Posted November 14, 2007 That sounds good mate. We worked on it last night. Just need to do the autobox now and it'll be ready:) Nice one;) I'll be up for a look one night!!! Getting itchy feet with mine so we thought we would have a go at fitting the FMIC and probably a gauge or two... Quote Link to comment Share on other sites More sharing options...
hoff Posted November 14, 2007 Share Posted November 14, 2007 Good to here mate, so it begins:) Give me a shout one night next week and I'll see if mikes about:) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.