Supra Noodle Posted November 5, 2007 Share Posted November 5, 2007 Help!!! Ecu needed for a 96 N/A (6 speed manual),or advice on where to get it fixed.So if anyone happens to have one lying around. Link to comment Share on other sites More sharing options...
Supra Noodle Posted November 10, 2007 Author Share Posted November 10, 2007 Link to comment Share on other sites More sharing options...
rovervi Posted November 10, 2007 Share Posted November 10, 2007 I may have one available after next weekend hopefully as i am having tt conversion done. It will be at Jezz's garage if thats closer than where i am (Stoke) drop me a PM Link to comment Share on other sites More sharing options...
Soop Dogg Posted November 15, 2007 Share Posted November 15, 2007 What's happened to your current one - it's VERY unusual for an ECU to fail, TBH. Link to comment Share on other sites More sharing options...
Supra Noodle Posted November 16, 2007 Author Share Posted November 16, 2007 Wasn't sending a signal to sixth injector, unplugged it, reconnected the next day and alls good again:confused:Got a spare now just in case. Link to comment Share on other sites More sharing options...
Alex Posted November 16, 2007 Share Posted November 16, 2007 It's not the ECU...it's the pins on the wiring or the cables themselves. Bad connection or an interfering signal from something else... Link to comment Share on other sites More sharing options...
Supra Noodle Posted November 17, 2007 Author Share Posted November 17, 2007 I think your right, had it checked out at Owen Developments and they suggested it could be the Ecu, and couldn't find any lose connections. My ecu does have the Mine's VX-Rom just wondered if anyone else has experienced any problems with theirs. Link to comment Share on other sites More sharing options...
Recommended Posts