Wipeout Posted December 16, 2004 Share Posted December 16, 2004 Is it possible to fit a J Spec (Blitz Access) ECU into a UK Spec car? Thanks Link to comment Share on other sites More sharing options...
Matt Harwood Posted December 16, 2004 Share Posted December 16, 2004 The first problem I can see is that the JDM one won't be set up to run a MAF sensor, so no, unless you can get it reprogramed. But first you need to find out if it can support the MAF sensor Link to comment Share on other sites More sharing options...
Wipeout Posted December 16, 2004 Author Share Posted December 16, 2004 Probably more hassel than it's worth. I know nothing about it. There is one on ebay at the moment, £50 so far. Seems like a good buy if it stays at that, but i doubt it will. Here Cheers Matt Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted December 16, 2004 Share Posted December 16, 2004 Why does that ECU have an extra black wiring block?? Link to comment Share on other sites More sharing options...
Ian C Posted December 16, 2004 Share Posted December 16, 2004 That's a metal tang that slots into a hole in the bulkhead... -Ian Link to comment Share on other sites More sharing options...
Barry Posted December 17, 2004 Share Posted December 17, 2004 Does that ECU completely replace the stock ECU then, or does it sit piggyback to the stock unit? Or, if it replaces the stock one, will you need a fuel computer to go with it? Link to comment Share on other sites More sharing options...
Ian C Posted December 17, 2004 Share Posted December 17, 2004 Completely replaces it and does who-knows-what with the fuelling, timing, rev limit etc. Deffo don't use a piggyback, if you are going to use an airflow fudger then stick with a stock ECU as a base. -Ian Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now