adam bell Posted October 24, 2007 Share Posted October 24, 2007 saw my mate who i bought the supra off today and he gave a trl fuel cut controller but it has no instructions. does any one know if its any good or how to fit it up. do i need it at the moment my car has: full decat blitz full system standard uk fuel pump large front mount intercooler uprated plugs not sure which bov uprated air filter hks i think the guy i bought it off said it was running 1.2 bar boost but it has no boost controller so not sure how he has done it also the car is a uk car Quote Link to comment Share on other sites More sharing options...
Guest coldflame Posted October 24, 2007 Share Posted October 24, 2007 i have the same one buddy and lucky for you i have the insructions give me your email addy and i will scan them and send them u tommorow Quote Link to comment Share on other sites More sharing options...
edge Posted October 24, 2007 Share Posted October 24, 2007 If the car is running 1.2 bar then it will have a FCD fitted. Get a boost guage first. Also you could look in the passenger footwell to see if there are any gadgets that have been fitted? Quote Link to comment Share on other sites More sharing options...
Steviekid Posted October 24, 2007 Share Posted October 24, 2007 Get instructions here: http://www.thor-racing.co.uk/Fuel_Cut_Defencer-VFCC.asp Quote Link to comment Share on other sites More sharing options...
Homer Posted October 24, 2007 Share Posted October 24, 2007 Instructions are available here: http://www.thor-racing.co.uk/Fuel_Cut_Defencer-VFCC.asp Make sure you read this link before raising boost beyond 1.0 bar: bpu Edit - too slow! Quote Link to comment Share on other sites More sharing options...
adam bell Posted October 24, 2007 Author Share Posted October 24, 2007 If the car is running 1.2 bar then it will have a FCD fitted. Get a boost guage first. Also you could look in the passenger footwell to see if there are any gadgets that have been fitted? cant see any gadgets fitted so i am guessing its not running 1.2 bar. are there any members on here that could help me fit it i am hopeless with a soldering iron:) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.