lockys96 Posted October 13, 2007 Share Posted October 13, 2007 Cant fault the guy for effort, patience and value for money. Ryan your a top lad, firstly, the car has been sitting at toyotagt for a while, which is a good thing! after i decided, that i better not drive the car on the f-con for too long, as i didnt know what it was set up for, and most likely on race fuel. i decided to go for the link ecu, and planned to meet ryan to get it set up, however, before i decided to get my car fully checked, which i came of great news, as the company 3s service centre was only 45mins up the road from me, after speaking to james at 3s through email, we agreed that i could drop my car to them, for a service while i go on holiday. i finished early one morning, and asked james if i could pop down same day, to have my car checked over, as it had problems with boosting only 0.6bar, james stopped all other work when i arrived and spent around 4 hrs with me that day, fault checking, compression testing etc. the car wasnt idling very well, on running very good, so the decision was made to leave the Phoenix in the hands of god, however the fault wasnt found that day, and they continued looking for it until a great big hole was found in the intercooler, i hoped this was all that was wrong with the car on thursday ryan met with james, to drive the car and map while i was at work, 4 hours spent, and only 20% of the map was completed. james had stopped work in the work shop to drive the car for me, while ryan mapped the car, however i was glad the next day that i wouldnt have to be called out for work, so meant i could spend time at toyotgt driving the car, while ryan mapped it, have a few issues with cold starting the car still, due to low compression when cold, with the 2.2 stroker, cams and 1000cc injectors!!! had problems with the blitz boost controller, not controlling boost. boost was spiking to 2bar. after this was bypassed to run through wastegate pressure, it felt amazing. the injectors 1000cc were 70% maxed out at 1bar!! ryan only planed on staying a couple of hours today, and planned to leave at 2pm, he left at 4.20pm determined to get the boost dial installed. we managed to get it wired up, but didnt seem to work when we took it out before leaving. I have arranged to meet up with ryan at surrey rolling road on tuesday, to get the rest of the map done, and find out whats she really running. all this extra time ryan put in, ryan still didnt want extra money, apart from fuel costs, as he is a real motorhead and loves to work on high performance cars, the car is running really well, almost stock apart from the clutch, and when the boost kicks in at 4.5k revvs, all hell brakes loose, and seems to keep wanting to revv, and it keeps pushing you back wanting more, although the revv range is set to 8k at the mo. Many thanks for today Ryan, look forward to seeing you on tuesday. and big thanks to james and the lads at 3s service centre, for putting up with the so called 'phone jacker' and for keeping my car in a safe, secured place, whilst this work is being carried out, and when im on holiday Many thanks for today Ryan, look forward to seeing you on tuesday. Link to comment Share on other sites More sharing options...
Gaz6002 Posted October 13, 2007 Share Posted October 13, 2007 He knows his stuff doesn't he mate? Looking forward to seeing your motor, James tells me she's a beast!! Link to comment Share on other sites More sharing options...
lockys96 Posted October 13, 2007 Author Share Posted October 13, 2007 its surprised both, james and ryan!!! Link to comment Share on other sites More sharing options...
Muffleman Posted October 13, 2007 Share Posted October 13, 2007 Ryan's a good chap Told you to stick with that turbo and see how it performs before changing it Really pleased you're getting somewhere though mate, I can totally understand how frustrating it can be to buy a car that is 'finished' yet seems to need work when it gets here. Link to comment Share on other sites More sharing options...
Ryan.G Posted October 13, 2007 Share Posted October 13, 2007 Hi *Phone jacker* (if simon has your number you will know what i mean ) Just to add a fews things to what simon said basically the car does not come with any idle control valve fitted so on a cold start its hard to get it to idle well but after an hour i got it a good as its going to get. Now simon does not have to sit with foot on gas till warms up. I am currently looking for as small ICV now. ryan only planed on staying a couple of hours today, and planned to leave at 2pm, he left at 4.20pm determined to get the new map sensor installed. we managed to get it wired up, but didnt seem to work when we took it out before leaving. My little nephew is not happy with you also it wasn't the map sensor silly it was just the pot switch for controlling the boost. The new boost control valve works fine tho. I will just swap the volume pot on tueday and jobs a gooden. Cant wait to tuesday tho gunna be a animal. Might be the fastest car i have ever been in when finished as we need to check on road after dyno just hope you can keep the throttle 100% Ryan Link to comment Share on other sites More sharing options...
Gaz Walker Posted October 13, 2007 Share Posted October 13, 2007 Hi *Phone jacker* (if simon has your number you will know what i mean ) Sounds great fellas. Looking forward to the vid on full boost Si Gaz. Link to comment Share on other sites More sharing options...
lockys96 Posted October 13, 2007 Author Share Posted October 13, 2007 Hi *Phone jacker* (if simon has your number you will know what i mean ) Just to add a fews things to what simon said basically the car does not come with any idle control valve fitted so on a cold start its hard to get it to idle well but after an hour i got it a good as its going to get. Now simon does not have to sit with foot on gas till warms up. I am currently looking for as small ICV now. My little nephew is not happy with you also it wasn't the map sensor silly it was just the pot switch for controlling the boost. The new boost control valve works fine tho. I will just swap the volume pot on tueday and jobs a gooden. Cant wait to tuesday tho gunna be a animal. Might be the fastest car i have ever been in when finished as we need to check on road after dyno just hope you can keep the throttle 100% Ryan silly!!! sorry im confused what you were wiring in:p as for throttle, there is you saying full throttle when in 4th gear and the car in front is one second a bean, the next a bus. star wars here we come. give me some respect with this amount of power, and so called twitchy cars, and 3weeks ownership. and i wont go by the name of phone jacker! Link to comment Share on other sites More sharing options...
lockys96 Posted October 13, 2007 Author Share Posted October 13, 2007 Sounds great fellas. Looking forward to the vid on full boost Si Gaz. ill take my camera to get a vid of the car on dyno. Link to comment Share on other sites More sharing options...
Jurgen-Jm-Imports Posted October 13, 2007 Share Posted October 13, 2007 nice one looking forward to seeing it mpped in uk.. i take it the fcon is now binned ? Link to comment Share on other sites More sharing options...
lockys96 Posted October 13, 2007 Author Share Posted October 13, 2007 well if you call me clio a bin, then yes.... its in the boot of that. i doubt anyone will buy it due to mapping costs, Link to comment Share on other sites More sharing options...
Wez Posted October 13, 2007 Share Posted October 13, 2007 Hiya Simon, nice to meet you today, that motor is going to be an animal, looks very well thought out. Link to comment Share on other sites More sharing options...
lockys96 Posted October 13, 2007 Author Share Posted October 13, 2007 nice to meet you too, do you have 2 supras? Link to comment Share on other sites More sharing options...
Wez Posted October 13, 2007 Share Posted October 13, 2007 nice to meet you too, do you have 2 supras? Yeah Link to comment Share on other sites More sharing options...
SupraAyf Posted October 13, 2007 Share Posted October 13, 2007 Si, I have been out of the frame for a while so lets see some pics of the new motor please mate;) Sounds awesome from Ryan's comments:D Link to comment Share on other sites More sharing options...
lockys96 Posted October 13, 2007 Author Share Posted October 13, 2007 ill get some for you fella on tuesday at the rolling road Link to comment Share on other sites More sharing options...
SupraAyf Posted October 13, 2007 Share Posted October 13, 2007 ill get some for you fella on tuesday at the rolling road Can't wait Si - It sounds as if you have a right beast there;) Good choice IMO:) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now