supradibbs Posted December 1, 2004 Share Posted December 1, 2004 Having fitted this weekend hopefully but just relised where the hell am i going to put it:p I have a double DIN stereo so limited space there have a boost gauge where the clock used to live and i dont want to loose the vent Any help gratefully recieved Quote Link to comment Share on other sites More sharing options...
michael Posted December 1, 2004 Share Posted December 1, 2004 Mine - the AVC-R is on a bracket normally used for a Nokia phone cradle. I'm planning to remove and sell the RSM and G Sensor soon and if I ever get my SAFC II back from lending it to someone I'll put that on there instead, I think 3 units would be a bit too much Quote Link to comment Share on other sites More sharing options...
supradibbs Posted December 1, 2004 Author Share Posted December 1, 2004 Thats what i was thinking some kinda bracket!!! Quote Link to comment Share on other sites More sharing options...
JustGav Posted December 1, 2004 Share Posted December 1, 2004 Replace... top glove box with a panel and mount everything there.... Quote Link to comment Share on other sites More sharing options...
SimonB Posted December 1, 2004 Share Posted December 1, 2004 Originally posted by supradibbs Thats what i was thinking some kinda bracket!!! http://www.dashmount.co.uk do a bracket that goes to the left of the heater controls. I have my E01 stuck on one of those. Or you could try for in the drivers sun visor although I'm not sure if the cable would reach. Quote Link to comment Share on other sites More sharing options...
CJ Posted December 1, 2004 Share Posted December 1, 2004 Simon Do you have any pics of th mount with the Profec attached? Quote Link to comment Share on other sites More sharing options...
SimonB Posted December 1, 2004 Share Posted December 1, 2004 Originally posted by CJ Simon Do you have any pics of th mount with the Profec attached? I do now! Here you go:- http://www.simonshouse.plus.com/E01mount.jpg It's stuck on temporarily with those Pritt sticky pad things at the mo, which is what that white stuff is. I'm going to bolt it on, but I need to drill a couple of bigger holes in the mount for the Profec first to get the bolts through, and I couldn't be arsed when I stuck it on! Quote Link to comment Share on other sites More sharing options...
CJ Posted December 1, 2004 Share Posted December 1, 2004 Thanks Si Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.