ADL Mark Posted September 19, 2007 Share Posted September 19, 2007 I have three Axis 18" alloys left from a set (one was badly buckled and thrown out by the garage). I believe they are model 147's and they're not made any more hence I bought a new set of wheels. The two fronts are 9" and the rear is a 10" rim, all in ok condition just need a good clean and some decent metal polish on the rims to bring them up. I believe all 3 have slight kurbing to the outer rim but this could easily be taken off with some care and a little sandpaper. I'm not sure what the offsets are and I can't find it printed on the wheels. Front wheels: http://www.i-macca.co.uk/temp/oldwheelfront1.jpg http://www.i-macca.co.uk/temp/oldwheelfront2.jpg Rear wheel: http://www.i-macca.co.uk/temp/oldwheelrear3.jpg If anybody is really interested then I'll give them a clean up, they've been sat in the garden now for months and still have some brake dust along with all the other dirt all over them. I'm more than willing to split the set, so open to offers on each wheel if anybody is interested, otherwise I'll have a go at them on eBay. I'm down in East Sussex and would much prefer not to send these out, I haven't got anything to package them in for a start!! Link to comment Share on other sites More sharing options...
supra steveo Posted September 21, 2007 Share Posted September 21, 2007 how much you looking for for these ? *EDIT* doesnt matter ive just seem the rear is missing Link to comment Share on other sites More sharing options...
ADL Mark Posted September 27, 2007 Author Share Posted September 27, 2007 before I list them on eBay Link to comment Share on other sites More sharing options...
Recommended Posts