Gaz6002 Posted September 13, 2007 Share Posted September 13, 2007 Following my earlier thread: http://www.mkivsupra.net/vbb/showthread.php?t=104602 This is the thread to get your name down for this mod. The work can be done at ToyotaGT and the kit costs £175. This includes the motor, fixings and in-cabin switch. Each kit will be fitted to your individual bumper and so fitting time may vary but we are looking at around 2-4 hours fitting time should you want ToyotaGT to do the work. I will need to know whether you need fitting or just the kit. If fitting is required I can arrange a date/time with ToyotaGT. A video can be viewed here: Link to comment Share on other sites More sharing options...
jazz1 Posted September 13, 2007 Share Posted September 13, 2007 hey i want this and before i put my name down will i have to drill holes in my bumper? its the same as urs do luck? also how hard is it to fit Link to comment Share on other sites More sharing options...
DamanC Posted September 13, 2007 Share Posted September 13, 2007 Its nice, not £175 nice thou Link to comment Share on other sites More sharing options...
Gaz6002 Posted September 13, 2007 Author Share Posted September 13, 2007 hey i want this and before i put my name down will i have to drill holes in my bumper? its the same as urs do luck? also how hard is it to fit I'd advise having ToyotaGT fit to be honest - it does require a small amount of cutting of the bumper but the main body of the kit fits nicely inside the nose-cone. I wouldn't say it's the hardest mod to fit but ToyotaGT have experience in doing it so will make a decent job of it. Link to comment Share on other sites More sharing options...
Gaz6002 Posted September 13, 2007 Author Share Posted September 13, 2007 Its nice, not £175 nice thou Thats the cost of the parts mate. It uses Toyota bits you see. Link to comment Share on other sites More sharing options...
QSC Posted September 13, 2007 Share Posted September 13, 2007 How much will fitting cost ? Link to comment Share on other sites More sharing options...
Gaz6002 Posted September 13, 2007 Author Share Posted September 13, 2007 How much will fitting cost ? It depends on how much work is involved mate. It will be charged at ToyotaGT's hourly rate which is £40 per hour. Link to comment Share on other sites More sharing options...
csa Posted September 13, 2007 Share Posted September 13, 2007 as I live en Denmark I'm not able to go to ToyotaGT. is this kit ready for shipment, and could some sort of installguide be added? Link to comment Share on other sites More sharing options...
supradibbs Posted September 13, 2007 Share Posted September 13, 2007 Go Go Gadget number plate Got to be honest its a very cleaver idea but cant really see the point as you say for fitting of front mount etc but you would need to retract it for that then kinda defeats the object really as you may as well not have one fitted i cant see a copper gonna oh my mistake you do have a plate after all But with that said looks good nice smooth action so clearly well made Link to comment Share on other sites More sharing options...
Gaz6002 Posted September 13, 2007 Author Share Posted September 13, 2007 Go Go Gadget number plate Got to be honest its a very cleaver idea but cant really see the point as you say for fitting of front mount etc but you would need to retract it for that then kinda defeats the object really as you may as well not have one fitted i cant see a copper gonna oh my mistake you do have a plate after all But with that said looks good nice smooth action so clearly well made I see what you are saying - it's not designed for fooling police lol. It's for shows/racing only. It's so you can get the clean lines of your bumper when you want to show off or get decent airflow to the FMIC when you need it but then drive the car home legally afterwards. Link to comment Share on other sites More sharing options...
Gaz6002 Posted September 13, 2007 Author Share Posted September 13, 2007 as I live en Denmark I'm not able to go to ToyotaGT. is this kit ready for shipment, and could some sort of installguide be added? Shipment could be arranged to Denmark i'm sure. I will have to investigate the installation guide with ToyotaGT Link to comment Share on other sites More sharing options...
kieren1234 Posted September 13, 2007 Share Posted September 13, 2007 WOW, very expensive IMO. I wasn't expecting it to cost that much. I will still be interested but will fit myself instead of paying somone £40 an hour. Link to comment Share on other sites More sharing options...
Gaz6002 Posted September 13, 2007 Author Share Posted September 13, 2007 WOW, very expensive IMO. I wasn't expecting it to cost that much. I will still be interested but will fit myself instead of paying somone £40 an hour. Thats quite a cheap hourly rate for a tuning firm IMO mate Link to comment Share on other sites More sharing options...
SupraGirlie Posted September 13, 2007 Share Posted September 13, 2007 I don't mind paying that, good price for a unique modification that no where else can do or ever has done! Won't be for about one month though for me. Link to comment Share on other sites More sharing options...
Guest Nicholas Posted September 13, 2007 Share Posted September 13, 2007 Good idea however I got away with no front number plate for 10 months then sold my grey car so I'd rather go without completely as both are illegal Link to comment Share on other sites More sharing options...
Gaz6002 Posted September 13, 2007 Author Share Posted September 13, 2007 Good idea however I got away with no front number plate for 10 months then sold my grey car so I'd rather go without completely as both are illegal It locks down into place for road use mate. Mine passed MOT. Link to comment Share on other sites More sharing options...
SupraGirlie Posted September 13, 2007 Share Posted September 13, 2007 sorry if this has been covered before, but can it work from one of the buttons on a clifford fob? Link to comment Share on other sites More sharing options...
Gaz6002 Posted September 13, 2007 Author Share Posted September 13, 2007 sorry if this has been covered before, but can it work from one of the buttons on a clifford fob? I'm sure that could be arranged. I'll have to talk to ToyotaGT about that. Link to comment Share on other sites More sharing options...
Nick Posted September 14, 2007 Share Posted September 14, 2007 Can you post up some high res pictures of the actual parts please. I'm interested to see if this would fit my GT-R with Japanese plates. May need to be adapted but I can get that done. There are options available in Japan but they're not motorised, and have a horrible style bracket. Link to comment Share on other sites More sharing options...
Recommended Posts