BigDino Posted September 12, 2007 Share Posted September 12, 2007 This flashes when the O/D button is pressed in and stays on when its de-pressed. Is this normal? I would of thought it was normal when you switch th O/D off as its telling you its off, but why does it flash when its on? Link to comment Share on other sites More sharing options...
BigDino Posted September 13, 2007 Author Share Posted September 13, 2007 bump....anybody? Link to comment Share on other sites More sharing options...
Jspec Germany Posted September 13, 2007 Share Posted September 13, 2007 You have an error code flashing at you. Do a search: Checking Error Codes My money is on Code 42. Link to comment Share on other sites More sharing options...
Guest Chumpalot Posted September 13, 2007 Share Posted September 13, 2007 the O/D LED should never flash. It's either on or off. As Jspec said it could well be error code 42. Do a search on here, it's been well documented Link to comment Share on other sites More sharing options...
hoff Posted September 13, 2007 Share Posted September 13, 2007 I had this. It only happens now and again though for some reason. Its a code 42 or the speed sensor I was told. Link to comment Share on other sites More sharing options...
Jspec Germany Posted September 13, 2007 Share Posted September 13, 2007 It's actually probably something behind the dash. Dry solder joints on the back of the odometer are a common cause, as are a bad buffer signal output from the same unit. Dodgy Delimiter/converter installs can cause it also. Rarely is a bad speed sensor the cause. Link to comment Share on other sites More sharing options...
BigDino Posted September 14, 2007 Author Share Posted September 14, 2007 Cheers guys, Mine also only flashs at times, think its when i get to a certain speed it flashes. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now