Pig Posted August 31, 2007 Share Posted August 31, 2007 My car is being mapped today at TDI. Here is a link if you wish to see it in action (will post when its actually on) http://www.tdi-plc.com/index.php?pge=C_dynocam What RWHP do you think it will get? Will prob run up to 1.6 bar. Here is my Spec: T61 (water cooled and 360 thrust bearing) CAMS: HKS 264 264 Twin Pumps 880cc injectors AEM CP pistons Carillo Rods Ferrea valves etc Greddy 3 row FMIC 19row Oil cooler 6 Speed box HKS Twin plate clutch P.S Please keep your fingers crossed for me Link to comment Share on other sites More sharing options...
tooquicktostop Posted August 31, 2007 Share Posted August 31, 2007 I dont know what you will make but I wish you all the best and good luck with the mapping, I like you have been waiting for my car to be ready all summer and still I am no closer to getting it finished, goes in next week I hope Will be watching the dyno when your car appears, how have you found TDI by the way ?? Link to comment Share on other sites More sharing options...
Pig Posted August 31, 2007 Author Share Posted August 31, 2007 Will be watching the dyno when your car appears, how have you found TDI by the way ?? I dont want to tempt fate yet as i have not seen the car. There were A LOT of things that needed to be put right on the car. They have sent me plenty of pictures to backup there findings. I will be putting up pics of the finished work once its done, the difference in quality is another world though! Link to comment Share on other sites More sharing options...
tooquicktostop Posted August 31, 2007 Share Posted August 31, 2007 Yes they do have very high build quality and I would expect good numbers from your set up A little work they did for me on the R32 Link to comment Share on other sites More sharing options...
tDR Posted August 31, 2007 Share Posted August 31, 2007 Good luck! T61 @ 1.6bar boost, I reckon 400 RWHP Cheers, Brian. Link to comment Share on other sites More sharing options...
kieren1234 Posted August 31, 2007 Share Posted August 31, 2007 WOW, having a live camera of the dyno is a brilliant idea, what time will it be on the dyno then so i can check back. Link to comment Share on other sites More sharing options...
Guest Milton Posted August 31, 2007 Share Posted August 31, 2007 Yes they do have very high build quality and I would expect good numbers from your set up A little work they did for me on the R32 That looks awesome. What work did they do to your car? Sorry, bit off topic, their work looks very good though. Link to comment Share on other sites More sharing options...
Guest Nicholas Posted August 31, 2007 Share Posted August 31, 2007 397atw Link to comment Share on other sites More sharing options...
Pig Posted August 31, 2007 Author Share Posted August 31, 2007 If i get less than 400 at the wheels im not going to take the car. They can keep it and put a bigger turbo on Ill start uploading some pics onto this thread to show come of the work Link to comment Share on other sites More sharing options...
tooquicktostop Posted August 31, 2007 Share Posted August 31, 2007 That looks awesome. What work did they do to your car? Sorry, bit off topic, their work looks very good though. The R32 was a JUN built car with a T88 etc and was VERY laggy, this drove me crazy so I went to TDI for a turbo change, ended up having a top end rebuild and the following HKS T04Z Single turbo kit HKS Wastegate HKS Manifold HKS Ti Racing exhaust HKS Downpipe HKS BOV HKS 264 Cams HKS Fuel Rail HKS 1000cc injectors HKS Type R Intercooler HKS F Con V Pro ECU Top end was rebuild with new valves, springs, retainers and polished etc I had all the bolts and anodized and the engine bay generally given a new lease of life by their very exacting standards of work, the car made 735 BHP on their dyno on pump fuel at 1.8 bar, it was already running a fully built JUN bottom end Anyway back to topic, sorry Jon Link to comment Share on other sites More sharing options...
tDR Posted August 31, 2007 Share Posted August 31, 2007 Is it not one of those (look at my lovely big power figures) dynapack thingies they use? So they'll say 500 at the hubs and that's the same as at the wheels..... but the figure will be very flywheel Cheers, Brian. Link to comment Share on other sites More sharing options...
Guest Milton Posted August 31, 2007 Share Posted August 31, 2007 The R32 was a JUN built car with a T88 etc and was VERY laggy, this drove me crazy so I went to TDI for a turbo change, ended up having a top end rebuild and the following HKS T04Z Single turbo kit HKS Wastegate HKS Manifold HKS Ti Racing exhaust HKS Downpipe HKS BOV HKS 264 Cams HKS Fuel Rail HKS 1000cc injectors HKS Type R Intercooler HKS F Con V Pro ECU Top end was rebuild with new valves, springs, retainers and polished etc I had all the bolts and anodized and the engine bay generally given a new lease of life by their very exacting standards of work, the car made 735 BHP on their dyno on pump fuel at 1.8 bar, it was already running a fully built JUN bottom end Anyway back to topic, sorry Jon Sorry, back on topic. Link to comment Share on other sites More sharing options...
Pig Posted August 31, 2007 Author Share Posted August 31, 2007 Is it not one of those (look at my lovely big power figures) dynapack thingies they use? So they'll say 500 at the hubs and that's the same as at the wheels..... but the figure will be very flywheel Cheers, Brian. Car will be put on SRR soon after to compare figures See link for dyno type Link to comment Share on other sites More sharing options...
tooquicktostop Posted August 31, 2007 Share Posted August 31, 2007 Car will be put on SRR soon after to compare figures See link for dyno type After the last dyno session on a rolling road ruined both my back tyres I would prefer my car to be mapped on a hub dyno IMO, I found TDI set up excellent and the car was fantastic when I got it back Link to comment Share on other sites More sharing options...
Sheefa Posted August 31, 2007 Share Posted August 31, 2007 Good luck John. You must be made of money though paying a visit to TDI. I've heard they're quite pricey but very good, true? Link to comment Share on other sites More sharing options...
Pig Posted August 31, 2007 Author Share Posted August 31, 2007 Before: After: TDI are not cheap, they do a discounted labour rate for club members, you get what you pay for though as you can see from the pics above. Link to comment Share on other sites More sharing options...
Thorin Posted August 31, 2007 Share Posted August 31, 2007 What cams? Link to comment Share on other sites More sharing options...
Muffleman Posted August 31, 2007 Share Posted August 31, 2007 Looks much better Out of interest, what is TDI's hourly rate ? Link to comment Share on other sites More sharing options...
grahamc Posted August 31, 2007 Share Posted August 31, 2007 Good luck! T61 @ 1.6bar boost, I reckon 400 RWHP Cheers, Brian. 397atw If i get less than 400 at the wheels im not going to take the car. They can keep it and put a bigger turbo on Ill start uploading some pics onto this thread to show come of the work This car should make more than 400 atw... I made 378 atw on hybrids with all the trimmings. Link to comment Share on other sites More sharing options...
tDR Posted August 31, 2007 Share Posted August 31, 2007 But didn't Homer's T67 make 460 ATW? I was going for a slightly lower figure than that. Link to comment Share on other sites More sharing options...
Pig Posted August 31, 2007 Author Share Posted August 31, 2007 Looks much better Out of interest, what is TDI's hourly rate ? Standard is 80 + vat - i will find out what the discounted rate is and let you know. EDIT: have updated 1st post. CAMS are 264 264 Link to comment Share on other sites More sharing options...
Thorin Posted August 31, 2007 Share Posted August 31, 2007 I'd say 450 at the hubs. flywheel HP > hubs > wheels. Link to comment Share on other sites More sharing options...
johnd-mkiv Posted August 31, 2007 Share Posted August 31, 2007 good luck with it mate hope to see you sunday Link to comment Share on other sites More sharing options...
Pig Posted August 31, 2007 Author Share Posted August 31, 2007 good luck with it mate hope to see you sunday What figures did you get at the wheels with your t67 mate? You coming down on sat night? Link to comment Share on other sites More sharing options...
Jake Posted August 31, 2007 Share Posted August 31, 2007 I'll guess at 420 at the wheels, about 500 at the hubs. Good luck Jon, you deserve some. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now