JimC Posted August 22, 2007 Share Posted August 22, 2007 I'm after an active spoiler lip, for fitting in the down position. I do not want it to function, therefore the motor etc is not required. Just the main plastic lip, metal underside support brackets (already fixed to lip), and the cast aluminium top piece with rubber strip. There should also be 4 brackets attatched. 2 at each end, and 2 towards the centre of the lip, which i will use to fit the lip to my car. I have attached some pics of what i need. PLEASE NOTE - THIS IS MY BROTHERS SO I CANNOT USE IT! Cheers peeps, Jim Link to comment Share on other sites More sharing options...
rovervi Posted August 22, 2007 Share Posted August 22, 2007 I have been after one for a while too mate quite rare i think Link to comment Share on other sites More sharing options...
JimC Posted August 22, 2007 Author Share Posted August 22, 2007 Damn rite! Not quite sure if they're availiable from Toyota or not. I must admit i havent looked into that yet...may be worth trying, although I'd guess it'd be pretty pricey!!! Link to comment Share on other sites More sharing options...
Pixelfill Posted August 22, 2007 Share Posted August 22, 2007 I have all the metalwork spare - but no actual plastic spoiler if that is any use to you. D8MOA was going to have it for £20 but he's sold up so it's all boxed up and ready for shipping Mike Link to comment Share on other sites More sharing options...
JimC Posted August 22, 2007 Author Share Posted August 22, 2007 bugger! Wish i'd known earlier!!! Thanks for the offer Pixelfill, but i may hold out a little longer for the whole thing. If niothing comes i may give you a shout tho. Link to comment Share on other sites More sharing options...
D8MOA Posted August 22, 2007 Share Posted August 22, 2007 may be worth having the frame off pixelfill then asking jezz if he has the rubber and other parts you req!! Link to comment Share on other sites More sharing options...
JimC Posted August 24, 2007 Author Share Posted August 24, 2007 Bump Link to comment Share on other sites More sharing options...
JimC Posted September 26, 2007 Author Share Posted September 26, 2007 BUMP!!! last time! Link to comment Share on other sites More sharing options...
Recommended Posts