Racelogic launch control problems..any help greatly appreciated!

[Austrian Supra]

I have my racelogic working in my Supra since about 3 years now, with Phils file and am happy with it.

Last year I built the engine and installed a single turbo setup.

Now I have about 800hp at 1,7 bar.

 

The car runs strong and the RL seems to work generally, but there´s one thing that doesn´ t since the mods...

 

The launch control.

 

I cannot activate it.

Normally I just push the green button and step on the gas….and it revs to where the revlimiter is set.

 

Since last year, when I did the mods, I can push that button as often as I want….it doesn´t activate the LC .

 

I haven`t changed any wires (as I use the plug and play AEM stand allone), and as I see the light flashing when checking the ABS sensors (fast and faster the fastzer I go), and also

see it flashing when I check rpm signal (faster and faster the higher I rev), it seems all inputs are ok…..and as it reduces power when going WOT in first gear, I see it generally works…

 

Any Idea?

 

I also tried to set a new rev limit in pushing the button, then pushig (and holding it) and reving to where I want it to be…….

As long as I hold the button the light flashes (ist that correct?).

Then the revlimit should be set……

 

But when I try to activate the LC then …pushing the button…………..the revlimit doesn´t work

It`s just like I did nothing………..it´s not activated……..

 

 

ANY IDEA?

 

PLEASE help!

 

I have a race on 1st Sept. and need the LC working by then………….

 

 

Thanks a lot in advance!

[Austrian Supra]

Just found it out myself.

[dandan]

What was wrong?