SUPRASUZUKI Posted August 3, 2007 Share Posted August 3, 2007 I'm contemplating fitting one of the aftermarket rads (Fluidyne ect) but they don't have the integral cooler for the ATF. Does anyone know what size cooler is required if a rad without the integral cooler is used on an auto? Link to comment Share on other sites More sharing options...
tDR Posted August 3, 2007 Share Posted August 3, 2007 Just one of the standard size fluidynes will be fine - have a look at http://www.mvpmotorsports.com - dusty will sort you out. Cheers, Brian. Link to comment Share on other sites More sharing options...
SUPRASUZUKI Posted August 3, 2007 Author Share Posted August 3, 2007 Thanks Brian. I've got a Mocal cooler that I was going to fit in addition to the stock cooler. I'm just not sure if this will be man enough on it's own if I go the Fluidyne route. It's a 23 row (11' wide) so a decent size, but is it big enough??. Link to comment Share on other sites More sharing options...
Gamer Posted August 3, 2007 Share Posted August 3, 2007 Just for info the Fluidyne transmission cooler dimensions are as follows: 18" X 8 3/4" X 1" Mind you this is for the 9 channel design, not sure if the older 6 channel design is the same size or not. Link to comment Share on other sites More sharing options...
SUPRASUZUKI Posted August 3, 2007 Author Share Posted August 3, 2007 Thanks for the info. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now