Dave F Posted July 31, 2007 Share Posted July 31, 2007 When fitting a new master cylinder does it have to be bench bled or can I just fit it and bleed it via the brake calipers. I have plenty of fluid!! Cheers Dave Link to comment Share on other sites More sharing options...
merckx Posted July 31, 2007 Share Posted July 31, 2007 From the manual: If the master cylinder has been disassembled or if the reservoir becomes empty, bleed the air from the master cylinder. (a) Disconnect the brake lines from the master cylinder. (b) Slowly depress the brake pedal and hold it. © Block off the outer holes with your fingers, and release the brake pedal. (d) Repeat (b) and © 3 or 4 times. Link to comment Share on other sites More sharing options...
Dave F Posted July 31, 2007 Author Share Posted July 31, 2007 Cool cheers mate Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now