Dave F Posted July 31, 2007 Share Posted July 31, 2007 When fitting a new master cylinder does it have to be bench bled or can I just fit it and bleed it via the brake calipers. I have plenty of fluid!! Cheers Dave Quote Link to comment Share on other sites More sharing options...
merckx Posted July 31, 2007 Share Posted July 31, 2007 From the manual: If the master cylinder has been disassembled or if the reservoir becomes empty, bleed the air from the master cylinder. (a) Disconnect the brake lines from the master cylinder. (b) Slowly depress the brake pedal and hold it. © Block off the outer holes with your fingers, and release the brake pedal. (d) Repeat (b) and © 3 or 4 times. Quote Link to comment Share on other sites More sharing options...
Dave F Posted July 31, 2007 Author Share Posted July 31, 2007 Cool cheers mate Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.