dandan Posted July 27, 2007 Share Posted July 27, 2007 Guys, I've searched for the pin outs for the EManage Ultimate wiring but had no real luck. Mohd's site being down is a slight PITA, can anyone help me out. I know from my searches the airflow signal is pin 62 and not 66! (Cheers Homer) Also am wondering about the same thing (pinouts on main ecu and abs ecu) for RLTC install. I must admit I haven't searched for these but figured I may as well add that request to this post. Thanks in advance for any help.... Dan Quote Link to comment Share on other sites More sharing options...
joeblitz Posted July 27, 2007 Share Posted July 27, 2007 did you get a fitment book ? if so use the ecu diagram in the jap side of the manual ... fitted mine some weeks ago had only one prob .... dont need to use analog connection ...any prob give me a pm Quote Link to comment Share on other sites More sharing options...
Ian C Posted July 27, 2007 Share Posted July 27, 2007 Time I uploaded this -IanEM Wiring.xls Quote Link to comment Share on other sites More sharing options...
Ian C Posted July 27, 2007 Share Posted July 27, 2007 did you get a fitment book ? if so use the ecu diagram in the jap side of the manual ... fitted mine some weeks ago had only one prob .... dont need to use analog connection ...any prob give me a pm Did you sort out the TPS wiring then -Ian Quote Link to comment Share on other sites More sharing options...
joeblitz Posted July 27, 2007 Share Posted July 27, 2007 yip ;) sent you a pm on this ... got my fpr must fit next week ..off on holidays to russia tomorrow Quote Link to comment Share on other sites More sharing options...
Ian C Posted July 27, 2007 Share Posted July 27, 2007 Sorry I get a lot of PMs -Ian Quote Link to comment Share on other sites More sharing options...
joeblitz Posted July 27, 2007 Share Posted July 27, 2007 no prob .... have being to busy at work and pissing rain can't get time to sort it out ... anyway will be in touch when i get back wan't to get to the uk in sept .... thanks again for the help Quote Link to comment Share on other sites More sharing options...
dandan Posted August 2, 2007 Author Share Posted August 2, 2007 Time I uploaded this -Ian Ian - thank you. Great post my friend. My fields harness is ready for another weekend of installing and fiddling now! Thanks Dan Quote Link to comment Share on other sites More sharing options...
Inferno Posted August 4, 2007 Share Posted August 4, 2007 Edit: NVM Quote Link to comment Share on other sites More sharing options...
agumi Posted February 24, 2013 Share Posted February 24, 2013 Anyone used pins from greddy ultimate ecu 31 and 37, for fcd Quote Link to comment Share on other sites More sharing options...
Mugello Posted February 24, 2013 Share Posted February 24, 2013 I have heard these ECU's are great for BPU setups and some say the best 'piggy back' ecu out there! How good are these ECU's when running a single turbo setup ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.