robin Posted July 26, 2007 Share Posted July 26, 2007 Recently one of the neighbours caught someone trying to take my dust caps off presumably to let down the tyre but luckily the locking dust caps prevented anything happening. They shouted at them and the little scrote ran off. Went out to the car today ready to go to work and discovered my offside rear was totally flat. Instantly I had visions of some hooded miscreant letting my tyres down but the cap was still on and nothing was slashed etc. Tried pumping it up but it was such a fast puncture it wouldn’t have held air long enough to get me to the tyre place or work so I had to bust out the space saver spare. I ended up jumping on my wheel brace to get the nuts off. I'm not huge but not that light at 13 stone either so they were on waaay to tight. Ended up managing to get the tyre repaired for £14 which isn't bad as it's a nice toyo t1r and only done 2k miles tops. Does anyone on here oil the threads/nuts on their wheels? Or torque them on properly? The air guns these tyre places use to wack them on far too tight in my opinion. I am just waiting for the thread to strip next time I have to take a wheel off. Quote Link to comment Share on other sites More sharing options...
ukApache Posted July 26, 2007 Share Posted July 26, 2007 i torque mine to about 140Nm i think. but i'm pretty sure the air guns they use have torque settings as well Quote Link to comment Share on other sites More sharing options...
Guest Nicholas Posted July 26, 2007 Share Posted July 26, 2007 Interesting I had a high speed blow out on one of my rear Toyo T1-R's last week. Quote Link to comment Share on other sites More sharing options...
robin Posted July 26, 2007 Author Share Posted July 26, 2007 i torque mine to about 140Nm i think. but i'm pretty sure the air guns they use have torque settings as well I have had a bad experiance in the past where when trying to remove a wheel on my old car the thread was nearly completely stripped on the wheel stud. I dont know if it went on cross threaded or was simply on too tight. I always try an oil the nuts a little now when I put them on. The guy at the tyre place said it was a chunk of metal. Looked like a bit of a razor blade or something. Quote Link to comment Share on other sites More sharing options...
Missile Posted July 26, 2007 Share Posted July 26, 2007 Sometime's the nut locks to the alloy if they are not removed for long stretches of time. But i agree, Tyre places do seem to do them up silly tight. Should never have to jump on your wheel brace thats for sure... Quote Link to comment Share on other sites More sharing options...
Havard Posted July 26, 2007 Share Posted July 26, 2007 Anything that is threaded should be oiled or copperslipped IMO!! There is no need to tighten then up massively anyway! H. Quote Link to comment Share on other sites More sharing options...
robin Posted July 26, 2007 Author Share Posted July 26, 2007 Well these tyres are only 2 months old and the wheels were off to do that so I think they just slammed the nuts on way too tight. I can understand why, imagine the legal battle if a wheel came off after they worked on it? Still its a PITA Quote Link to comment Share on other sites More sharing options...
Supra_dan Posted July 26, 2007 Share Posted July 26, 2007 I had to buy a new tyre the other day as mine had a nail in it and being a 265 30 R19 I was quoted £170 for one tyre by the garage that told me I had a nail. I was like hmmm I'll give you a call. I didn't I managed to get a Good Year Eagle F1 for £135 balanced and fitted. Quote Link to comment Share on other sites More sharing options...
robin Posted July 26, 2007 Author Share Posted July 26, 2007 thats a damn good price for a 19. I payed only slightly less for my 17's Quote Link to comment Share on other sites More sharing options...
Supra_dan Posted July 26, 2007 Share Posted July 26, 2007 thats a damn good price for a 19. I payed only slightly less for my 17's I couldn't believe it myself will be getting some more soon. Just pays to look around! Quote Link to comment Share on other sites More sharing options...
robin Posted July 26, 2007 Author Share Posted July 26, 2007 Was it a local place? or an online retailer? I got my 255/17 toyo T1R's from camskill and got a local place to fit them. Quote Link to comment Share on other sites More sharing options...
Supra_dan Posted July 26, 2007 Share Posted July 26, 2007 Was it a local place? or an online retailer? I got my 255/17 toyo T1R's from camskill and got a local place to fit them. It was a local place! Think they are called MJB Tyres! Quote Link to comment Share on other sites More sharing options...
RobDogg Posted July 26, 2007 Share Posted July 26, 2007 I need to order a new tyre tomorrow :-( Quote Link to comment Share on other sites More sharing options...
Guigsy Posted July 26, 2007 Share Posted July 26, 2007 i had a stuck wheel nut. managed to shear the stud off trying to remove it Quote Link to comment Share on other sites More sharing options...
DJButler Posted July 27, 2007 Share Posted July 27, 2007 I have had a bad experiance in the past where when trying to remove a wheel on my old car the thread was nearly completely stripped on the wheel stud. I dont know if it went on cross threaded or was simply on too tight. I always try an oil the nuts a little now when I put them on. The guy at the tyre place said it was a chunk of metal. Looked like a bit of a razor blade or something. Scrote's craft knife blade i expect. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.