Ryenose Posted July 8, 2007 Share Posted July 8, 2007 Afternoon, does anyone know whats meant to be displayed or come up on the two dash displays to the right of the centre bit? Nothing has ever come up on them? is this normal? it is connected at the back i have checked. Just curious, there doesnt seem to be any problems with car otherwise? Thanks, tim. Link to comment Share on other sites More sharing options...
imi Posted July 8, 2007 Share Posted July 8, 2007 OIL Pressure, Temp, ABS....Engine Light. Link to comment Share on other sites More sharing options...
Ryenose Posted July 8, 2007 Author Share Posted July 8, 2007 oh right thanks! so is it normal that nothing comes up on there then? Link to comment Share on other sites More sharing options...
Jake Posted July 8, 2007 Share Posted July 8, 2007 No. They should all come on with the ignition before you start the engine. (As a test they're working) Link to comment Share on other sites More sharing options...
hadyn Posted July 8, 2007 Share Posted July 8, 2007 Older supras suffer from the connectors to this display going bad. They usually need resoldering. I know this isnt techincal, but sometimes giving the unit a bang with your fist (not too hard of course) 'wakes' it up Link to comment Share on other sites More sharing options...
Ryenose Posted July 8, 2007 Author Share Posted July 8, 2007 oh dear, tht doesnt happen Link to comment Share on other sites More sharing options...
Kieran Posted July 8, 2007 Share Posted July 8, 2007 Sounds like dry joints on your connector mate. Five minute job to sort if you've got a soldering iron. Had the same problem myself a week or so ago. Have a look at this thread as well. http://www.mkivsupra.net/vbb/showthread.php?t=115407&highlight=check+warning+lights Link to comment Share on other sites More sharing options...
Ryenose Posted July 8, 2007 Author Share Posted July 8, 2007 cheers! ill go check tht out now! Link to comment Share on other sites More sharing options...
Ryenose Posted July 8, 2007 Author Share Posted July 8, 2007 right, taken it appart, all the four little bulbs are fine, where is it tht i need to solder? or what is it tht i need to do?? Link to comment Share on other sites More sharing options...
hoff Posted July 8, 2007 Share Posted July 8, 2007 Ive had this problem for ages and keep forgetting to find out the problem. Nice one, now i know i'll get it sorted:) Link to comment Share on other sites More sharing options...
Kieran Posted July 8, 2007 Share Posted July 8, 2007 right, taken it appart, all the four little bulbs are fine, where is it tht i need to solder? or what is it tht i need to do? Can you wobble the connector on the board? If you can, you just need to re-solder all the pins of the connector back on to the board. Link to comment Share on other sites More sharing options...
Ryenose Posted July 8, 2007 Author Share Posted July 8, 2007 Cheers Lads, sorted it out now! all working good! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now