ManwithSupra Posted July 6, 2007 Share Posted July 6, 2007 Is there anyway of telling if your front suspension arms are slightly bent i.e after a small prang? I am getting serious inside tyer wear on the tyer which is about 2cm wide and the rest of the tyer is fine (Hardly worn) To give you an idea the wheel is less than 1000 miles and this 2cm section has worn past the tread !! Now i have had the wheels and alignment done and the opposit tyer is wearing correctly, i dont know how to check this or what to check?? Quote Link to comment Share on other sites More sharing options...
wallace9 Posted July 6, 2007 Share Posted July 6, 2007 Sounds like your wheel alignment is out. I'd get it checked somewhere else Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted July 6, 2007 Share Posted July 6, 2007 Easiest way is to remove the arms and check them against a new one on the bench. Careful measurement against the ones on the other side MAY show a badly bent one, too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.