Guest jakewilks Posted June 20, 2007 Share Posted June 20, 2007 hi all, got an alarm for the supra it is 95 N/A j-spec auto the info with alarm asks for the wiring for : ignition low current solenoid feed wire, fuse for interior light circuit (for current sensing) the alarm gives out a 12v negative output on arm and a 12v output on disarm, i have to find a place to wire into central locking circuit, this is the main area of help i need,, does the supra work on a negative pulse for the locking, and where would i tie in to the wiring to fit alarm, i may need an interface module for central locking, could any of the experts point me in the right direction or post the relevent diagrams on the group pleeeeeese alarm type is microscan AN214 with microwave 2 stage shock sensing, immobiliser, central locking outputs john:blink: Link to comment Share on other sites More sharing options...
merckx Posted June 20, 2007 Share Posted June 20, 2007 ignition low current solenoid feed wire, This will be one for one of the immobiliser circuits on the alarm, the wire will be in the ones coming from the ignition barrel. It will prevent the starter motor from operating. Cant remember what colour it is though. Bare in mind I've got a facelift car and I'm not sure if all the Supra's have the same wiring. I checked them all first with my multimeter. The following were located in the fuse box in the drivers footwell The ones for the central locking on my car were . The blue connector at the bottom right. red/white wire goes to 0 volts to lock the car red/green wire goes to 0 volts to unlock the car Current sensing on my car. Blue connector at very top left The green wire is normally at 12 volts and goes to 0 volts when the door is opened. Indicators on my car were. White connector at bottom left. Green/yellow wire and green/black wire Link to comment Share on other sites More sharing options...
Guest jakewilks Posted June 21, 2007 Share Posted June 21, 2007 thanks merckx whem you say blue connector at bottom right and white conn at bott left are you mening behind fusebox or the actual fuse holders connections, you mention that these were in the fusebox in the footwell,just need to clarify the whereabouts of the connectors, again thanks for your trouble great bunch here, just noticed after i posted last night that the wiring diagrams are on the electrical info page,, had a look, but still double dutch, will have to print them off and look at them as a whole i think, am also going to strip dash tomorrow to tackle the head unit which is dead, and knocking from suspension, will post findings thanks and bye for now, if you can let me know before tomorrow on the connector positions please that would help a lot john Link to comment Share on other sites More sharing options...
merckx Posted June 21, 2007 Share Posted June 21, 2007 They're all in the drivers foowell on the right. There's different groups of wires plugged in, the colour refers to the connector which holds each group of wires, hope your are the same. Link to comment Share on other sites More sharing options...
Guest jakewilks Posted June 21, 2007 Share Posted June 21, 2007 thanks mate will post how i get on John Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now