Daston Posted June 19, 2007 Share Posted June 19, 2007 Hi guys Whats the daddy of all boost controllers for reliability ease of instation and looking the mutts nuts? I am looking to spend no more than £350 and would like it to go in the CD tray. Got that power craving now Link to comment Share on other sites More sharing options...
DekJZA80 Posted June 19, 2007 Share Posted June 19, 2007 I use the A'pexi AVC-R in the S14 the now, but will be using the same when i get the supra Link to comment Share on other sites More sharing options...
tooquicktostop Posted June 19, 2007 Share Posted June 19, 2007 i know it is more expensive but you said 'the daddy' perhaps you should think about a stand alone ECU as this would give you many features Link to comment Share on other sites More sharing options...
Daston Posted June 19, 2007 Author Share Posted June 19, 2007 that is true how much would one cost? And what benefits would a BPU car get over a boost controler (I supose it will help if I go single) Link to comment Share on other sites More sharing options...
tooquicktostop Posted June 19, 2007 Share Posted June 19, 2007 that is true how much would one cost? And what benefits would a BPU car get over a boost controler (I supose it will help if I go single) I have used F Con V Pro in my Skyline and AEM in my Supra, the F Con is very difficult to find supporting tuners but is a great ECU, the AEM is plug and play and gives you countless features including boost control, electric fan control, anti lag, over run, NOS control, full fuel mapping including race fuel, in fact it can control anything electronic etc etc, I have heard good stuff about Link and Motec also but have no experience Cost, you should factor in £1300 for AEM with map sensor, DLI and mapping Link to comment Share on other sites More sharing options...
gaz1 Posted June 19, 2007 Share Posted June 19, 2007 I have used F Con V Pro in my Skyline and AEM in my Supra, the F Con is very difficult to find supporting tuners but is a great ECU, the AEM is plug and play and gives you countless features including boost control, electric fan control, anti lag, over run, NOS control, full fuel mapping including race fuel, in fact it can control anything electronic etc etc, I have heard good stuff about Link and Motec also but have no experience Cost, you should factor in £1300 for AEM with map sensor, DLI and mapping with mapping? bugger me you must have had a good deal there mate:D Link to comment Share on other sites More sharing options...
tooquicktostop Posted June 19, 2007 Share Posted June 19, 2007 with mapping? bugger me you must have had a good deal there mate:D This is for base mapping only, not the map every 3 weeks I do at present Link to comment Share on other sites More sharing options...
Alex Posted June 19, 2007 Share Posted June 19, 2007 Way OTT. Gated BC's are what you want. Turbosmart's e-Boost2 is a gated EBC. For standard out the box unit's I'd speak to Nic about Blitz SBC-ID's as these have far better boost holding abilities than other Jap made EBC's. Link to comment Share on other sites More sharing options...
tooquicktostop Posted June 19, 2007 Share Posted June 19, 2007 Way OTT. Gated BC's are what you want. Turbosmart's e-Boost2 is a gated EBC. For standard out the box unit's I'd speak to Nic about Blitz SBC-ID's as these have far better boost holding abilities than other Jap made EBC's. Agreed but he was looking for the ultimate and had mentioned going single at a later date, this may save if he goes down that route ?? Link to comment Share on other sites More sharing options...
Daston Posted June 19, 2007 Author Share Posted June 19, 2007 yeah the single route is a bit up in the air thought as I really should be putting money towards my Ultima build Link to comment Share on other sites More sharing options...
Gruggs Posted June 19, 2007 Share Posted June 19, 2007 got an avc-r going if that helps. Always room for negiotiation. cheers G Link to comment Share on other sites More sharing options...
Gaz6002 Posted June 19, 2007 Share Posted June 19, 2007 AEM tru-boost is the best IMO. I've had a few EBCs now and the AEM has more than enough features. It's also the only unit using a specifially designed solenoid for use in a car. I got mine from Envy and paid significatly less than the blitz, Greddy or HKS equivilent. It also fits nicely in the hole currently taken up by your boost gauge. It has a digital screen displaying boost pressure so no need for a gauge at all . Link to comment Share on other sites More sharing options...
Angarak Posted June 19, 2007 Share Posted June 19, 2007 Daston, if you've got yourself a JDM RZ and are only going for BPU level you may not need a boost controller to see 1.2bar (just double de-cat with RR). If thats the case, you have just saved yourself some money that can be put to other supra-related items Link to comment Share on other sites More sharing options...
Daston Posted June 19, 2007 Author Share Posted June 19, 2007 ahh I thought that it wasnt gaunteed that you will hit 1.2bar Link to comment Share on other sites More sharing options...
Angarak Posted June 21, 2007 Share Posted June 21, 2007 It probably isnt gauranteed, however I see 1.2 bar from 2nd through to 4th consistently (I never plant it in 1st, and Im too scared to be planting it in 5th/6th to see what boost I see). I think certain boost controllers can help to maintain a set boost level on WOT, as well as increasing spool time by keeping the wastegate closed for longer. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now