dannyspeed Posted June 11, 2007 Share Posted June 11, 2007 Planning to fit my fuel pump, one evening this week. Just looked at the instructions and everything looks pretty staight forward. The only question is, the new electrical harness that comes with the pump also comes with butt splices/connecters. Now once you cut the existing wires and add the new harness with the butt connectors i guess this get submurged in fuel. will this be safe? I guess it must be as it shows this in the instructions. Any ideas/info Link to comment Share on other sites More sharing options...
merckx Posted June 11, 2007 Share Posted June 11, 2007 It'll be fine, mine hasn't blown up yet. It's best to stagger the connectors on the two wires so that if the worst happened you won't get a short circuit. If they're the standard type crimp connectors with the plastic insulators they'll be fine, most of us on here do it this way. Link to comment Share on other sites More sharing options...
dannyspeed Posted June 11, 2007 Author Share Posted June 11, 2007 It'll be fine, mine hasn't blown up yet. It's best to stagger the connectors on the two wires so that if the worst happened you won't get a short circuit. If they're the standard type crimp connectors with the plastic insulators they'll be fine, most of us on here do it this way. Nice one mate. Thanks for the quick reply. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now