tomssupra Posted May 29, 2007 Share Posted May 29, 2007 Hello, I've recently had the DoLuck fitted, it was genuine from Sumo, does anyone know if its normal for one of the edges not to be tight to the car? - image below Thanks http://www.tomshosting.co.uk/TOM Quote Link to comment Share on other sites More sharing options...
jazz1 Posted May 29, 2007 Share Posted May 29, 2007 mine dont stick out like that:rolleyes:, unless one of your screws are missing to be attatched to the wing? because when i tested fitted mienit was like that a bit until i attatched the screws Quote Link to comment Share on other sites More sharing options...
rik Posted May 29, 2007 Share Posted May 29, 2007 You sure your wing is straight, no previous damage? How did the original bumper fit? Quote Link to comment Share on other sites More sharing options...
jazz1 Posted May 29, 2007 Share Posted May 29, 2007 like i said i got the same from sumo power and no fitment issues at all mines perfect Quote Link to comment Share on other sites More sharing options...
tomssupra Posted May 29, 2007 Author Share Posted May 29, 2007 the standard bumper was a perfect fit (as it should be!), the wing hasnt been hit or anything - i remember when i ordered it i noticed after it was for a 97+ but the sumo guy said it would be fine... is this the problem or it is just not screwed in enough? Quote Link to comment Share on other sites More sharing options...
jazz1 Posted May 29, 2007 Share Posted May 29, 2007 the standard bumper was a perfect fit (as it should be!), the wing hasnt been hit or anything - i remember when i ordered it i noticed after it was for a 97+ but the sumo guy said it would be fine... is this the problem or it is just not screwed in enough? id say screw Quote Link to comment Share on other sites More sharing options...
mr keef Posted May 29, 2007 Share Posted May 29, 2007 is it on the locating pins both sides? and screwed in correctly? Quote Link to comment Share on other sites More sharing options...
SupraStar 3000 Posted May 29, 2007 Share Posted May 29, 2007 thats not right. Must be pushed out by a pin/screw thats not located. Quote Link to comment Share on other sites More sharing options...
CarlT67 Posted May 30, 2007 Share Posted May 30, 2007 I think it is how they fit, as aren't the do-luck fronts designed to work with the do-luck wings, or wheel arches...? Sure someone has said that before. Mine sticks out a little but not quite as much as yours. Maybe try attaching a screw or fibreglassing a hook onto the back side and attching it somehow that way. Quote Link to comment Share on other sites More sharing options...
Daston Posted May 30, 2007 Share Posted May 30, 2007 almost looks as if a screw should go through that lining thats hanging down to pin it and the bumper to the wing Quote Link to comment Share on other sites More sharing options...
Bob Posted May 30, 2007 Share Posted May 30, 2007 Looks like the arch plastics aren't even properly attached, so I'd guess it's down to poor fitting. Quote Link to comment Share on other sites More sharing options...
miko_supra Posted May 30, 2007 Share Posted May 30, 2007 kick it into place Quote Link to comment Share on other sites More sharing options...
Branners Posted May 30, 2007 Share Posted May 30, 2007 ask Sumo how well its supposed to fit and why its not lining up. The original doluck stuff is supposed to be spot on every time, if its not then you may as well have bought a knock off which is not what Andy at Sumo would want. JB Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.