Whitesupraboy2 Posted May 26, 2007 Share Posted May 26, 2007 Are lengths important, or does it not really matter. I just think one of mine to the EGCV looks longer then before it was replaced. Link to comment Share on other sites More sharing options...
Jake Posted May 26, 2007 Share Posted May 26, 2007 Shorter is better in theory. In practise I don't believe it makes any difference. Unless you're talking about yards of it of course Link to comment Share on other sites More sharing options...
Whitesupraboy2 Posted May 26, 2007 Author Share Posted May 26, 2007 cheers mate, i'm talking a good few cms. I'll shorten the ones I think are too long tomorrow morning. Link to comment Share on other sites More sharing options...
peter richards Posted May 26, 2007 Share Posted May 26, 2007 what i found with mine was if i cut them to short , then they had a tendancy to kink , if that makes any sense , the smaller ones in particular Link to comment Share on other sites More sharing options...
boomstick Posted May 26, 2007 Share Posted May 26, 2007 what i found with mine was if i cut them to short , then they had a tendancy to kink , if that makes any sense , the smaller ones in particular I bought some new SFS vacuum hoses and made them shorter as the original ones... Instead of the nice round "lose" bend, they kinked... So shorten them if you like, but not to short! Dennis Link to comment Share on other sites More sharing options...
Whitesupraboy2 Posted May 26, 2007 Author Share Posted May 26, 2007 cheers for warning guys Link to comment Share on other sites More sharing options...
Guest Dante Posted May 26, 2007 Share Posted May 26, 2007 Replacing all my vacuum hoses in my engine. What sizes do i need, not the lenght? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now