energy Posted May 25, 2007 Share Posted May 25, 2007 Hello everybody,.. i have a problem: how to configure this Boostcontroller,..does it anybody know ?! What "number" on pic 1 ,..etc.... thank you sorry for my english i am german Link to comment Share on other sites More sharing options...
CJ Posted May 25, 2007 Share Posted May 25, 2007 Which model is it? You may be able to download instructions off the interwebnet Link to comment Share on other sites More sharing options...
energy Posted May 25, 2007 Author Share Posted May 25, 2007 its a 1993 RZ TT oh you mean the boostcontroller,... i think i dont know the HKS EVC 4 or 3 Link to comment Share on other sites More sharing options...
bolarbag Posted May 25, 2007 Share Posted May 25, 2007 HKS EVC 3....if its a green light it will be your preset boost, you gotta hold in the sbc button to change or increase your boost, the light will turn red, when you physically hit the 'new' set boost an alarm will sound Link to comment Share on other sites More sharing options...
Nic Posted May 25, 2007 Share Posted May 25, 2007 There might be instructions here http://www.racecarnewmedia.co.uk/hks/installation.htm Link to comment Share on other sites More sharing options...
energy Posted May 25, 2007 Author Share Posted May 25, 2007 the pics show if you want to configure the "low mode" or the "high mode" thank you for the link but there is no construction for this model,.. Link to comment Share on other sites More sharing options...
bolarbag Posted May 25, 2007 Share Posted May 25, 2007 HKS EVC 3....if its a green light it will be your preset boost, you gotta hold in the sbc button to change or increase your boost, the light will turn red, when you physically hit the 'new' set boost an alarm will sound To set low and high mode hold in the top right hand button for 3secs, the display will turn red, scroll through the menu and adjust the low and high using th eup and down buttons, you can also adjust gain too Link to comment Share on other sites More sharing options...
energy Posted May 25, 2007 Author Share Posted May 25, 2007 i want to rum at 1.2 bar,... so how to configure?!? what "number" i have to put there where is written sec ?! Can you perhaps say what at pic 1 ?! what at pic 2 ?!?..... thank you for your time Link to comment Share on other sites More sharing options...
bolarbag Posted May 25, 2007 Share Posted May 25, 2007 Pic 1 is what its currently set at, i.e. all going well the boost controller will be running at 1.0bar, Pic 2 is giving you the chance to set PIC1, Pic 3 is you actual boost...0.30kg/cm-1 is what your running at idle Pic 4 shows 30secs, the amount of time your new boost setting will run at if you hold in sbc(Scramble Boost Control)...its like an overboost function....i.e. run 1.0 bar usually, then hit sbc button, run at 1.2 for 30secs Pic 5 is your SBC boost setting as said before...so if you press and hold sbc you will run at 1.2bar, There are limiting factors on what your car will actually run,but these are the settings that your boost controllers solenoid should operate at I have the manual at home, on pdf, I can get it up ina couple of hours;) Link to comment Share on other sites More sharing options...
energy Posted May 25, 2007 Author Share Posted May 25, 2007 and after that 30 secs it will decrease again at 1bar ?!? and for waht does the "100" stand ?! Link to comment Share on other sites More sharing options...
bolarbag Posted May 25, 2007 Share Posted May 25, 2007 Sorry thought pic 2 was 1.00 that will be your gain setting...if set properly should aid in spooling When I used SBC I set it to the highest setting so it never actually went off,but I ran daily driving at 1.1bar for safety...o.t.t tbh Link to comment Share on other sites More sharing options...
energy Posted May 25, 2007 Author Share Posted May 25, 2007 okay: i set pic1 =1.0 pic2= 100 pic3= i also left it how it is pic4= i left 30 secs or the time i will and pic5= i set 1,2 ?!?! is this right how did u configure ?! so i also than have it at 1.1bar how much HP you have at 1.1 !?! thank youuuuuuuuu !!! Link to comment Share on other sites More sharing options...
energy Posted August 12, 2007 Author Share Posted August 12, 2007 Hello 2 all I have another question for that topic,.. in my BC (at the 2nd picture) i can set the OFFSET ( i think its the GAIn mode by other BC,but i am not sure) from 50%-150%.... what does this means ?! a higher or a lower offset... what is better ?! thank you Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now