What's this part I need?

[Jake]

On the compressor housing of a single turbo there's a small L shaped piece, male thread both ends, that connects a braided vacuum hose to the compressor housing. Somehow I've lost the one from my broken PHR turbo and I'm betting the new one doesn't come with it.

 

Anyone know what I'm on about? Where can I get this part and what do I need to order, specifically?

 

Thanks.

[Jake]

Anyone?

[Homer]

This bit Jake?

[Jake]

Yeah that's the fella. But mine had a threaded end rather than a push-on connector.

[Homer]

If it's going into a braided hose then it I don't think it matters if it's push on or got a thread.

 

I have a few connectors similar to that lying around. They all look about right, they're all around the right size for the Presicion compressor which can't be too far off the PHR one. If you want them PM me your address.

 

If you can find the thread size (it's probably NFPT), then thinkauto supply a few variations.

[Jake]

That great Darryl, thanks.

 

What's it for anyway? I can't remember where the hose goes - wastegate or boost controller I guess?

[Homer]

Edited, first try made no sense! :

 

It needs to go to both. I plumbed mine direct to the side feed on the wastegate and T'd in a feed to the Boost controller solenoid 'IN' port.