Sheefa Posted May 7, 2007 Share Posted May 7, 2007 I have a pretty much brand new one and was thinking about doing a swap over itself if it doesn't sell. Anyone have a guide available and is it a difficult job? Had a search but can't find anything specific. What work does this entail? Bought some axle stands the other day and would give this a bash after the Dragonball. Anything new to the car that helps it sell must be good right! Thanks, Greg Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted May 7, 2007 Share Posted May 7, 2007 Simple, remove aux belt, unplug electrical connector, unbolt live terminal, unbolt and remove. Refitting is reversal of removal. Very simple job, I put my PHR one on in less than 20 minutes. Link to comment Share on other sites More sharing options...
Sheefa Posted May 7, 2007 Author Share Posted May 7, 2007 Thanks Ben mate I take theres no difference between Autos and Manuals in terms of fitting, only the output they give each? Cheers. Greg Link to comment Share on other sites More sharing options...
uk-rich Posted May 7, 2007 Share Posted May 7, 2007 nope, they fit the same Link to comment Share on other sites More sharing options...
Sheefa Posted May 7, 2007 Author Share Posted May 7, 2007 Cheers Rich mate Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted May 7, 2007 Share Posted May 7, 2007 Could of done it by now.... Link to comment Share on other sites More sharing options...
G-NEMIE Posted May 7, 2007 Share Posted May 7, 2007 greg just dont break anything i couldnt bare it jamie Link to comment Share on other sites More sharing options...
uk-rich Posted May 7, 2007 Share Posted May 7, 2007 greg and spanners Link to comment Share on other sites More sharing options...
Jive Posted May 7, 2007 Share Posted May 7, 2007 Make sure you know how to loosen off the auxillary belt off using the tensioner Link to comment Share on other sites More sharing options...
Bob Posted May 7, 2007 Share Posted May 7, 2007 If you need instructions Greg, gimme a call and I'll email you over a couple of scans from the Toyota manual. Link to comment Share on other sites More sharing options...
Sheefa Posted May 8, 2007 Author Share Posted May 8, 2007 Oi you cheeky gits! I am a dab hand with a spanner and a soldering iron. Tensioner, what's that then? A name for an old auxillary belt alike a pensioner? Please Bob, a few images might come in handy bud! Cheers, Greg Link to comment Share on other sites More sharing options...
Bob Posted May 8, 2007 Share Posted May 8, 2007 Oi you cheeky gits! I am a dab hand with a spanner and a soldering iron. Tensioner, what's that then? A name for an old auxillary belt alike a pensioner? Please Bob, a few images might come in handy bud! Cheers, Greg No problemo. I'll just build up the will power to get changed out of my dressing gown and wander down to the garage . . . Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now