Markie Posted May 3, 2007 Share Posted May 3, 2007 Hi all, Just wondering if anyone knows a bit about the Laserline 291 family of alarms.. Since the garage had it in today for the MOT its now beeping and flashing for about 20 seconds after the doors etc have remotely locked. It used to just beep and lock but now beeps, locks then does this spaced beeping and then just stops. Any ideas please? Link to comment Share on other sites More sharing options...
Ric Posted May 3, 2007 Share Posted May 3, 2007 it means a sensor/switch isn't working/connected & the alarm is not giving a total closure. Check the sensors and check the bonnet switch connection under the bonnet Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted May 3, 2007 Share Posted May 3, 2007 I had a problem with the ultrasonics on my laserline 996. If they are the same i have a new set in the garage you can have. Try diconnecting the ultrasonics if you can. or i think you can set the alarm and then press the top button to disarm the ultrasonics. hope this helps Dave Link to comment Share on other sites More sharing options...
Ric Posted May 3, 2007 Share Posted May 3, 2007 and yes the ultrasonics are the same Link to comment Share on other sites More sharing options...
Markie Posted May 4, 2007 Author Share Posted May 4, 2007 Cheers guys.. Will check when I get home.. Damn thing went off in the car park today already Link to comment Share on other sites More sharing options...
tbourner Posted May 4, 2007 Share Posted May 4, 2007 Could just be your boot not closed fully or something as well. I would assume you haven't been driving around with the boot open though! Link to comment Share on other sites More sharing options...
Markie Posted May 4, 2007 Author Share Posted May 4, 2007 Damn, I thought the rear was griping well Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now