paul_k Posted December 16, 2004 Share Posted December 16, 2004 Just bought a low beam headlight for my 97 Facelift J spec NA from Halfords. Their book says it should be a 9005 this however is 60W whereas the (UK) manual states 51 W. So bought this and the socket on the bulb has 2 guides instead of one. Should I buy the 9006 and try to bodge it in or keep the 9005 and cut the 2 guides out from the bulb socket... Do Halfords actually sell a bulb that fits? I think not. Why do J specs have to be different Cheers Paul Link to comment Share on other sites More sharing options...
Nic Posted December 17, 2004 Share Posted December 17, 2004 Just use the 9005, it should fit without any modification to the lugs. Link to comment Share on other sites More sharing options...
Stu_Fraser Posted December 17, 2004 Share Posted December 17, 2004 Ive just fitted UK spec headlights....... as others have said you can get the j spec bulbs to fit. I took a stanley knife to the bulbs to get them to fit Link to comment Share on other sites More sharing options...
merckx Posted December 17, 2004 Share Posted December 17, 2004 Ive just fitted UK spec headlights Stu, do they look better than the J spec plastic lights. I'm not sure whether to get some? Link to comment Share on other sites More sharing options...
Stu_Fraser Posted December 17, 2004 Share Posted December 17, 2004 Stu, do they look better than the J spec plastic lights. Yeah much better, none of that dull yellow plastic, just shiny clear glass:D like this: Link to comment Share on other sites More sharing options...
merckx Posted December 17, 2004 Share Posted December 17, 2004 Very nice! Cheers:) Link to comment Share on other sites More sharing options...
dangerous brain Posted December 17, 2004 Share Posted December 17, 2004 the 60W bulbs when you trim the two bits off fit OK and give a new lease of life to dulling J-spec plastic lights in the night vision aspect (obviously doesn't stop em looking crap in the day). I think i actually fitted phillips 65W bulbs in my last car and fitted the main beam 65W one in both main and dipped. I have UK glass lights on my new motor and I have to say even though the old J-specs weren't even yellow yet the glass ones look so much better. Link to comment Share on other sites More sharing options...
Terminator Posted December 17, 2004 Author Share Posted December 17, 2004 The UK lamps I bought were not up to much so I referbed them and sold them on. Have to stick with my little JDM lamps for now. Link to comment Share on other sites More sharing options...
paul_k Posted December 18, 2004 Share Posted December 18, 2004 OK removed the slots from the bulb sockets from the 9005 bulbs and they fit fine. Does anyone know what the reason is for the different slots on the J spec? Cheers Paul Link to comment Share on other sites More sharing options...
Seb Posted December 18, 2004 Share Posted December 18, 2004 Is it safe to use a 65w bulb in place of a 55w one? I'm tempted to stick 9005 bulbs in my dipped holders, but not sure if the extra 10w rating will do any damage. Seb Link to comment Share on other sites More sharing options...
Jake Posted December 18, 2004 Share Posted December 18, 2004 Originally posted by Seb Is it safe to use a 65w bulb in place of a 55w one? Yeah, it'll be fine. I've been using 100W bulbs in my dipped beam for the last few months, no problems yet. I did have a problem with some 55w Xenon bulbs but that was because they cheapo crap. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now