Ric Posted April 30, 2007 Share Posted April 30, 2007 Hi guys I've just mullered one of my drop links for the anti roll bar on the front. don't suppose anybody has any or any experience of cost from mr t? Pic below for referance Link to comment Share on other sites More sharing options...
Lucifer Posted April 30, 2007 Share Posted April 30, 2007 £36 adn a pig to get off. Molegrips and an air gun Link to comment Share on other sites More sharing options...
Bob Posted April 30, 2007 Share Posted April 30, 2007 Yep, utter bastard things. I managed to get my old ones off by wire-brushing all the remaining thread, copper-greasing it, then using a blow torch on the nut in short bursts. If you're replacing them, just take an angle-grinder to them - quicker and more satisfying Link to comment Share on other sites More sharing options...
Ric Posted April 30, 2007 Author Share Posted April 30, 2007 yeah i will be taking a angle grider too it as the nut is totally fooked just hoped sombody might have one lying around or its a mr t job Link to comment Share on other sites More sharing options...
Recommended Posts