Glosphil Posted April 30, 2007 Share Posted April 30, 2007 Going to fit a 60mm defi gauge in the air vent. Do you have to blank it off somehow to stop heat rising up on to the gauage? Thanks Link to comment Share on other sites More sharing options...
bolarbag Posted April 30, 2007 Share Posted April 30, 2007 I'd move or route the heat into an another vent,its rubbery plastic anyways so its a doddle, you dont want any electronic device to be exposed to that sort of heat, it might not be the 70C thats required to melt the electronics but it will be damn close;) Link to comment Share on other sites More sharing options...
ivan Posted April 30, 2007 Share Posted April 30, 2007 I taped the end over apart from a small section directing downwards. Link to comment Share on other sites More sharing options...
merckx Posted April 30, 2007 Share Posted April 30, 2007 Stuff a rag in to fill the the duct! Link to comment Share on other sites More sharing options...
Konrad Posted April 30, 2007 Share Posted April 30, 2007 Stuff a rag in to fill the the duct! Now that's pikey way I would just find some kind of blind at this size in plumbing shop Link to comment Share on other sites More sharing options...
Ben-san Posted May 1, 2007 Share Posted May 1, 2007 I concur with sealing it off, though not with anything flamable. Use some aluminium tape if you can find some, but remember to allow for the depth of the guage. Link to comment Share on other sites More sharing options...
Guest mk47 Posted May 1, 2007 Share Posted May 1, 2007 got the spoiler on phil Link to comment Share on other sites More sharing options...
bodilx6 Posted May 1, 2007 Share Posted May 1, 2007 Route it to the glove comp and chill your refreshments Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now