DannoSupra Posted April 28, 2007 Share Posted April 28, 2007 348.8 Hp at 1.3 Bar What u reakon? Link to comment Share on other sites More sharing options...
Jake Posted April 28, 2007 Share Posted April 28, 2007 At the wheels? What mods? Link to comment Share on other sites More sharing options...
DannoSupra Posted April 28, 2007 Author Share Posted April 28, 2007 Flywheel, 3" turbo Back and apexi boost controller Link to comment Share on other sites More sharing options...
Bobbeh Posted April 28, 2007 Share Posted April 28, 2007 I would hope that is at the wheels Link to comment Share on other sites More sharing options...
AndyT Posted April 28, 2007 Share Posted April 28, 2007 Nice car and bay mate. 349 bhp on standard tubbs sounds about right I think. Link to comment Share on other sites More sharing options...
Jake Posted April 28, 2007 Share Posted April 28, 2007 Flywheel, 3" turbo Back and apexi boost controller Oh What was the figure at the wheels? That's the one that means something. Link to comment Share on other sites More sharing options...
DannoSupra Posted April 28, 2007 Author Share Posted April 28, 2007 274 i think Link to comment Share on other sites More sharing options...
Bobbeh Posted April 28, 2007 Share Posted April 28, 2007 Sounds like that figure is correct compared to the fly one you have got, but I think you should be making much more than that if you are truely running 1.3 bar. Link to comment Share on other sites More sharing options...
DannoSupra Posted April 28, 2007 Author Share Posted April 28, 2007 Sounds like that figure is correct compared to the fly one you have got, but I think you should be making much more than that if you are truely running 1.3 bar. what u mean? i need a new intercooler to start off with, i'll get a front mount before the bodykit goes on, then i'll take it back! see what happends then, i usually run the apexi off @ 1.0bar because of the intercooler not being as sufficient as it should! Link to comment Share on other sites More sharing options...
Jake Posted April 28, 2007 Share Posted April 28, 2007 He means that a UK is supposed to be making 326bhp at 0.8 bar. So increasing the boost by over 50% you would expect to gain more than 20bhp. Link to comment Share on other sites More sharing options...
mikeyb10supra Posted April 28, 2007 Share Posted April 28, 2007 I would hope that is at the wheels Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted April 28, 2007 Share Posted April 28, 2007 Sounds rather low to me, my J spec made 362 BHP at 1.0 bar. Link to comment Share on other sites More sharing options...
Darragh Posted April 28, 2007 Share Posted April 28, 2007 mine made 335bhp running at 1.0bar although every car that day seamed to be down on power lol and they all seamed to be down 30bhp from what they should have been the best bet is to go to a few more and see if you get the same read out Link to comment Share on other sites More sharing options...
terribleturner Posted April 28, 2007 Share Posted April 28, 2007 Sounds low to me too for 1.3bar Think i made 346rwhp at 1.2bar Link to comment Share on other sites More sharing options...
Whitesupraboy2 Posted April 28, 2007 Share Posted April 28, 2007 I made 332RWHP at 1.2 so definatly sounds a bit low Link to comment Share on other sites More sharing options...
DannoSupra Posted April 29, 2007 Author Share Posted April 29, 2007 think the dyno is a bit mong'd. my mates civic vti got 115hp, should be 160. it was a freebee in a local college, i'll go sumwhere proper after gettin this intercooler. what sort of power should i get running avc'r, 3" turbo back an large intercooler? Link to comment Share on other sites More sharing options...
Guest StevenSheen Posted April 29, 2007 Share Posted April 29, 2007 mine is only running 0.8 bar and developed 361bhp. Link to comment Share on other sites More sharing options...
Whitesupraboy2 Posted April 29, 2007 Share Posted April 29, 2007 mine is only running 0.8 bar and developed 361bhp. Flywheel or at the wheel and which Dyno? As that seems high. Link to comment Share on other sites More sharing options...
Jake Posted April 29, 2007 Share Posted April 29, 2007 mine is only running 0.8 bar and developed 361bhp.Seems unlikely Link to comment Share on other sites More sharing options...
bromy Posted April 29, 2007 Share Posted April 29, 2007 Mine made 283 at the wheels @ 0.35bar, not had it done since but now at 0.8bar Link to comment Share on other sites More sharing options...
Bobbeh Posted April 29, 2007 Share Posted April 29, 2007 mine is only running 0.8 bar and developed 361bhp. On a dodgy dyno.. doesnt sound accurate at all. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now