Ewen Posted April 26, 2007 Share Posted April 26, 2007 Search inconclusive..... Can they be calibrated (with a loaned boost gauge) or totally u/s ? Link to comment Share on other sites More sharing options...
Pete Posted April 26, 2007 Share Posted April 26, 2007 They're just poop. Link to comment Share on other sites More sharing options...
Jake Posted April 26, 2007 Share Posted April 26, 2007 How would you calibrate one, there's no digits on the dial. I would think it'd be too small to focus on while it would matter anyway Link to comment Share on other sites More sharing options...
ivan Posted April 26, 2007 Share Posted April 26, 2007 They just give a relative + or - boost indication and IMO are totally useless. Just invest in an after market 60mm one and fit it instead of the centre vent Ewen. Assistance available if needed. Link to comment Share on other sites More sharing options...
Ewen Posted April 26, 2007 Author Share Posted April 26, 2007 How would you calibrate one, there's no digits on the dial. I would think it'd be too small to focus on while it would matter anyway Just wondered if the reading they gave was at least consistant, in which case the markings could be quantified by comparing with figures from another gauge. Idle minds and all that. Link to comment Share on other sites More sharing options...
Ewen Posted April 26, 2007 Author Share Posted April 26, 2007 They just give a relative + or - boost indication and IMO are totally useless. Just invest in an after market 60mm one and fit it instead of the centre vent Ewen. Assistance available if needed. I'm building up to a decent gauge purchase Ken...just a question I wanted to ask. Thanks for the offer of help:) Link to comment Share on other sites More sharing options...
Pete Posted April 26, 2007 Share Posted April 26, 2007 Just wondered if the reading they gave was at least consistant, in which case the markings could be quantified by comparing with figures from another gauge. Idle minds and all that. It is consistent with my Blitz MD between about -0.3 bar and +0.3 bar. Anywhere out that range it seems to be either at the bottom or all the way at the top. It's only electrics, I'm sure you could scale the signal down and mess about, but like Jake says, it's too small really to read anyway. Link to comment Share on other sites More sharing options...
Ewen Posted April 26, 2007 Author Share Posted April 26, 2007 Thats fine, thanks. Link to comment Share on other sites More sharing options...
Nic Posted April 27, 2007 Share Posted April 27, 2007 Ewen, is there enough room to fit an aftermarket boost gauge in it's place? May be a chance I could get one of these 45mm diameter gauges which may fit. http://www.omorimeter.com/45mm_electrical_std_turbo_bz.jpg Link to comment Share on other sites More sharing options...
ivan Posted April 27, 2007 Share Posted April 27, 2007 The trouble is that the electrics for the stock one are all built-in to the dash behind the gauge face plate Nic. I thought about doing just that but thought again once I took a look. I think someone here had a go though. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now