ajazyasin Posted April 22, 2007 Share Posted April 22, 2007 Ive ploughed through many threads on the search results and cant find the exact answer i need so appologies if it has... I have: 2 walbro in tanks TTC dual feed rail Aeromotive FPR I need to get the fuel lines made up for my system. Am i correct in saying that I run 2 lines(one from each pump) to the rail. Then a return from rail to FPR. Then FPR to tank? Obviously there will be 2 filters in the feed lines but is there anything else however small ive missed here? Also, where can i get inline filters> thanks in advance people:) Link to comment Share on other sites More sharing options...
JamieP Posted April 22, 2007 Share Posted April 22, 2007 Mine is twin pumps with one feed and one return, it Y's under the fuel rail to connect to each end, then returns to the fpr and back to the tank. Link to comment Share on other sites More sharing options...
ajazyasin Posted April 22, 2007 Author Share Posted April 22, 2007 Is this better than running 2 lines? Link to comment Share on other sites More sharing options...
JamieP Posted April 22, 2007 Share Posted April 22, 2007 Works well with mine, cant rember the line size, it was either -6 or -8. Link to comment Share on other sites More sharing options...
ajazyasin Posted April 22, 2007 Author Share Posted April 22, 2007 Ok, so tell me if this should cut it: 2 walbros to Y piece. Single line with filter all the way under rail where we have another Y piece. Lines go to either side of rail and one returns from centre to FPR. FPR returns back to tank. Correct? anything missing? thanks so much Link to comment Share on other sites More sharing options...
2JZ-GTE-IS200 Posted April 22, 2007 Share Posted April 22, 2007 that is better,...id use -6 lines im using -6 for an aeromotive pump, as recomended by aeromotive Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now